Craftsman 358.351560 Operator's Manual page 6

KNOW YOUR SAW
READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERAT-
ING YOUR CHAIN SAW. Compare the illustrationswith your unit to familiadze
yourseff with the _ocation of_thevadous controlsand adjustments. Save this
manual for future reference. '
Bar Tool Front Handle
Starter Rope
OWSTOP
CRRFT3MRN"
Bar Oil RII Cap Housing
Cylinder Cover
Fast Idle
Fuel Mix RII Cap
Lockout Adjus_ng Ct_n
Screw Direction
Rear of Travel
Handle
Throttle Choke
Tdgger Knob BarClarnp Chain Bar Clamp Nuts GuideBar
Catcher
ON/STOP SWITCH
The ON/STOP Switch is used to stop
the engine.
THROTTLE TRIGGER
The throttletdgger controlsengine
speed.
THROTTLE LOCKOUT
The throttle lockout must be pressed
before you can squeeze the throttletrig-
ger. This feature prevents you from ac-
cidentallysqueezing the tdgger.
F_ IDLE LOCK
The fast idle lock holds the throttle tdg-
ger in the starting position.Activate the
fast idle lock by pressing the throttle
lockout and squeezing the throttle tfig-
_e_. With the throttle rigger squeezed,
press the fast idle lock. Release the
thmffie lockoutand tdgger while holding
the fast idle lockbutton.
CHOKE KNOB
The Choke Knob activates the choke to
provideadditionalfuel to the engine
duringcold starting.
PRIMER BULB
The Pdmer Bulb circulates fuel to the
carburetor to provide quicker starting.
CHAIN TENSION
It is normal for a new chain to stretch
dudng first 30 minutes of operation. You
should check your chain tension fre-
quent. See Chain Tension under the
enaca and Adjustments section.
6