Craftsman 917.2736404 Owner's Manual page 18

MA,.TE.A.OE SO.EOU'E
F,LL,NOATES
AS YOU COMPLETE /__._" .......
REGULAR SERVICE _"_r/'/%'4r_J£-'4r_--J£'_ S" SERVICE DATES
Check Brake Operation _
Check Tire Pressure
Check Operator Presence and
T
Interlock Systems If
R
Check for Loose Fasteners If Ks
A Sharpen/Replace Mower Blades 11_3
C Lubrication Chart I_
0 Check Battery Level 1_4
R
Clean Battery and Terminals If
Check Transaxle Cooling
v'
Check V-Belts
Check Engine Oil Level If I_
Change Engine Oil (with oil filter) 1_'1,2
E Change Engine Oil (without oil filter)
_1_1, 2
N Clean Air Filter 11_'2
G Clean Air Screen 11_'2
Inspect Muffler/Spark
Arrester
i/
E Replace Oil Filter (If equipped) 11_1,2
Clean Engine Cooling Fins
Replace Spark Plug I_ I_
Replace Air Filter Paper Cartridge I_tl'2
Replace Fuel Filter _#
1 - Change more often when operating under a heavy load or
in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
3 - Replace blades more often when mowing in sandy soil.
4 - Not required if equipped with maintenance-free battery.
5 - Tighten front axle pivot bolt to 35 ft.-Ibs+ maximum.
Do not overtighten.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover
items that have been subjected to operator
abuse or negligence. To receive full value
from the warranty, operator must maintain
tractor as instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your trac-
tor.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
• At least once a year you should replace
the spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
interlock systems for proper operation.
5. Check for loose fasteners.
LUBRICATION CHART
dY Spindle -- Spindle
Zerk ; _r Zerk
n
_Front Wheel t _Front Wheel
Bearing ........ ,L._Bean ng Zerk
Zerk
@Engine ,. ,, "--,
'+ ', i
t i
,,! !
, ', 01++4',
(_ General Purpose Grease
@ REFER TO Maintenance "ENGINE" SECTION
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of the
self-lubricating bearings. If you feel they
must be lubricated, use only a dry, pow-
dered graphite type lubricant sparingly.
18