Advertisement
Scalping
/'_
MOWING
- Your trimmer is ideal for
mowing in places conventional
lawn
mowers cannot reach. In the mowing
position, keep the line parallel to the
ground. Avoid pressing the head into
the ground as this can scalp the
ground and damage the tool.
Mowing
SWEEPING
- The fanning action of
the rotating line can be used for a
quick and easy clean up. Keep the
line parallel to and above the surfaces
being swept and move the tool from
side to side.
Sweeping?
]
I__ ____[,.,,.
MAINTENANCE
SCHEDULE
_,
WARNING:
Disconnect
the spark plug before performing
maintenance
except for carburetor
adjustments.
CARE & MAINTENANCE
TASK
Check for loose fasteners and parts
Check for damaged
or worn parts
Inspect and clean unit and labels
Clean air filter
Inspect muffler and spark arresting
screen
Replace spark plug
WHEN TO PERFORM
Before each use
Before each use
After each use
Every 5 hours of operation
Every 50 hours of operation
Yearly
GENERAL
RECOMMENDATIONS
The warranty on this unit does not
cover items that have been subjected
to operator
abuse or negligence.
To
receive full value from the warranty,
the operator
must maintain
unit as
instructed
in this manual. Various ad-
justments
will need to be made peri-
odically to properly maintain your unit.
CHECK
FOR LOOSE
FASTENERS
AND PARTS
• Spark Plug Boot
• Air Filter
• Housing Screws
• Assist Handle Screws
• Debris Shield
CHECK
FOR DAMAGED
OR
WORN
PARTS
Contact
Sears Service Center for re-
placement
of damaged
or worn parts.
• ON/OFF Switch - Ensure ON/OFF
switch functions
properly
by moving
the switch to the OFF position.
Make
sure engine stops; then restart en-
gine and continue.
• Fuel Tank - Discontinue
use of unit
if fuel tank shows signs of damage
or leaks.
• Debris Shield - Discontinue
use of
unit if debris shield is damaged.
Advertisement
