Download Print this page

CRAFTSMAN 315.114010 Operator's Manual

19.2 volt nailer/stapler.
Hide thumbs
Most useful pages: More

Advertisement

Operator's Manual
19.2 VOLT NAILER/STAPLER
Model No.
315.114010
Save this manual for
future reference
• Safety
• Features
• Operation
• Maintenance
• Parts List
WARNING:
To reduce the risk of
injury, the user must read and understand
the operator's manual before using this
product.
Customer
Help Line: 1-800-932-3188
Sears,
Roebuck
and Co., 3333
Beverly
Rd., Hoffman
Estates,
IL 60179
USA
Visit the Craftsman
web page: www.sears.com/craftsman
983000-357
7-03

Advertisement

   Related Manuals for CRAFTSMAN 315.114010

   Summary of Contents for CRAFTSMAN 315.114010

  • Page 1

    To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 Visit the Craftsman web page: www.sears.com/craftsman 983000-357 7-03...

  • Page 2

    Parts Ordering / Service ............................... FULL ONE YEAR WARRANTY ON CRAFTSMAN CORDLESS NAILER/STAPLER If this rRRFIFSMAN Cordless Nailer/Stapler fails to give complete satisfaction within one year from the date of purchase, RETURN IT TO THE NEAREST SEARS STORE OR SEARS SERVICE CENTER IN THE UNITED STATES, and Sears will repair it, free of charge.

  • Page 3

    • DO not overreach. Keep proper footing and bal- WARNING: Read and understand all instruc- ance at all times. Proper footing and balance enable tions. Failure to follow all instructions listed below, better control of the toot in unexpected situations. Do may result in electric shock, fire and/or serious not use on a ladder or unstable support.

  • Page 4

    SERVICE • When servicing a tool, use only identical replace- ment parts. Follow instructions in the Maintenance • Tool service must be performed only by qualified section of this manual. Use of unauthorized parts or repair personnel. Service or maintenance performed failure to follow Maintenance Instructions may create a by unqualified personnel could result in a risk of injury.

  • Page 5

    plug. If damaged, have replaced immediately by a WARNING:Never u sea battery thathasbeen dropped or received a sharpblow.A damaged qualified serviceman. Following this rule will reduce battery is subject t oexplosion. Properly dispose ofa the risk of electric shock, fire, or serious personal dropped battery immediately.

  • Page 6

    Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Volts Voltage Current Amperes Hertz Frequency (cycles per second)

  • Page 7: Specifications

    SPECIFICATIONS Motor .................................. 19.2VoltDC Switch................................Lock-Off Switch StapleSpeed ..............................30shots / min. Staple Size ........................1/2" crown width, 1/4" to 9/16" length Brad Size ............................. 18 gauge, 5/8" length Magazine Capacity ............................84 staple/brad Charger Input ............................120 V. 60 Hz, AC only Charge Rate .................................

  • Page 8

    HANDLE LOCKOFF SWITCH BATTERYPACK SHOWNINTOOL BATTERYPACK TACKING SWITCH SHOWNIN CHARGER MOUTH TRIGGER 4-1/2 in, CHARGER REDLED ON INDICATES GREENLEDON AFTERFASTCHARGING CYCLE,INDICATESFULLYCHARGEDBATTERY PACKAND IN TRICKLECHARGEMODE, YELLOWANDGREENLEDSON INDICATES DEEPLY DISCHARGED ORDEFECTIVEBATTERYPACK. Fig. 1 CHARGER See Figure 1. Your charger has a "key hole" hanging feature for convenient, space saving storage. Screws should be installed so that center distances are 4-1/2 inches apart.

  • Page 9

    INSTRUCTIONS PACKING LIST Whenunpacking t hetool: Nailer/Stapler • Carefully remove the tool and accessories from the box. Charger • Make sure that all items listed in the packing list are in- Battery Pack cluded. Operator's Manual • Inspect the tool carefully to make sure no breakage or damage occurred during shipping.

  • Page 10

    LED FUNCTIONS OF CHARGER WARNING: Do not allow familiarity with this tool to make you careless. Remember that a careless LED WILL BE ON TO INDICATE STATUS fraction of a second is sufficient to inflict severe CHARGER AND BATTERY PACK: injury.

  • Page 11

    TO INSTALL BATTERY PACK • Place staples in channel, legs facing upward and close base or drop nails in, left side of channel with "T" head • Place battery pack in your tool. Align raised rib on sitting on the slot base. Close base while making sure battery pack with groove inside toot.

  • Page 12

    NAILS Fig. 5 APPLICATIONS • This Nailer/Stapler is designed for light duty stapling or nailing into wood. TO STAPLE See Figure 6. • Hold handle firmly with tack mouth flat to workpiece forming a 90 ° angle; depress the lock-off button and pull switch trigger to drive staple.

  • Page 13

    Do not abuse power tools. Abusive practices can damage WARNING: When servicing, use only identical toot as well as workpiece. Craftsman replacement parts. Use of any other part may create a hazard or cause product damage. Only the parts shown on parts list, page 15, are intended to be repaired or replaced by the customer.

  • Page 15

    CRAFTSMAN 19.2 VOLT CORDLESS NAILER/STAPLER - MODEL NO. 315.114010 l The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your 19.2 VOLT CORDLESS NAILER/STAPLER or when ordering repair | parts.

  • Page 16

    Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters.

Comments to this Manuals

Symbols: 0
Latest comments: