Table of Contents
Advertisement
,_CAUTION:
Before performing any service or adjustments:
• Depress clutch/brake pedal fully and set parking brake.
• Place motion control lever in neutral (N) position.
• Place attachment clutch in =DISENGAGED"
position.
i
um ignition key "OFF" and remove key.
Make sure the blades and all moving parts have completely stopped.
Disconnect spark plug wire from spark plug and place wire where it cannot come
in contact with plug.
TRACTOR
TO REMOVE
MOWER
• Place attachment clutch in =DISEN-
GAGED" position.
•Tum
height adjustment knob to lowest
setting.
• Lower mower to its lowest position.
Remove retainer spring holding anti-
swaybar to chassis bracket and disen-
gage anti-swaybar
from bracket.
• Remove retainer springs from suspen-
sion arms at deck and disengage arms
from deck.
• Raise attachment
lift to its highest posi-
tion.
Chassis
Bracket
Adjustment
Nuts
Suspension
Arms
• Remove two retainer spdngs from each
front link and remove links.
• Slide mower forward and remove belt
from electric clutch pulley.
• Slide mower out from under right side of
tractor.
IMPORTANT:
If an attachment other than
the mower deck is to be mounted
on the
tractor, remove the front links.
TO INSTALL MOWER
Follow procedure descdbed in =INSTALL
MOWER
AND DRIVE
BELT" in the
Assembly section of this manual.
Lift
Unks
Front Mower
, Front
Suspension
Bracket
Retainer
Springs
_etainer
Spring
Anti-Sway
Bar
Mower
Bracket
Retainer Springs
23
Hide quick links:
Advertisement
Table of Contents
