Installation Instructions - GE CV936 Owner's Manual & Installation Instructions

Installation instructions
iNSTALL FILTERS
* Remove protective film covering the filters.
* Insert the filter into the "C" clips mounted to the top
of the vertical flont panel.
* Tap the filter against one side to align with outside
opening.
* Pull the filter down into the lower slots at the bottom
of the filter support.
Junction
Box
"C"Clip
Filters
Filter
Support
J
* To remove the filters, grasp the handle, push the
filter up and pull forward.
FINALIZE iNSTALLATiON
* Refer to the operating instructions to test all
contIols.
18