Related Manuals for Euro-Pro EP90E
Summary of Contents for Euro-Pro EP90E
- Page 1 Food Processor with Blender Use and Care Instruction Manual Model EP90E Read Instruction Manual Before Use EURO-PRO Operating LLC 94 Main Mill Street, Door 16 Plattsburgh, NY 12901 Tel.: 1 (800) 798-7391 www.euro-pro.com...
-
Page 2: Important Safeguards
6. Avoid touching moving parts at all times. 7. Do not operate the appliance with a damaged cord or plug, or after the appliance malfunctions, has been dropped or damaged in any manner. Return the appliance to EURO-PRO Operating LLC for examination, repair, electrical or mechanical adjustment. - Page 3 For your protection, the Food Processor has a double safety switch so that it cannot run unless the food processor lid (13) is locked in place and either the safety cover (2) or the blender (8) is also locked in place.
- Page 4 Food Processor with Blender MAIN COMPONENTS AND ACCESSORIES Processor Body Safety Cover Safety Cover/Blender Location On/Off Speed Control Dial Pulse Button Drive Shaft Storage Compartment Blender Blender Lid 10. Measuring Cap 11. Processor Bowl Voltage: 120V., 60 Hz Wattage: 600 Watts 12.
- Page 5 STORAGE The food processor is designed so that most of the attachments can be stored on-board. Storage Compartment 1. Lift the lid of the storage compartment (7). 2. Place whisk head (26) in storage compartment as shown. Storage Dome 1. Fit the processor bowl (11) &...
- Page 6 “OFF” before inserting or removing any attachments and before cleaning. 2. Fit the safety cover (2) into the food processor body and turn counterclockwise firmly until it “clicks” into place (the arrows will now be lined up). IMPORTANT:...
- Page 7 • Do not leave the appliance unsupervised when it is operating, i.e. when it is “ON”. 7. Never feed by hand. Always use the food pusher (14) to push food into the food processor bowl (11) through the feeder tube.
- Page 8 Plastic Dough Blade (25) CAUTION: Make sure that the unit is unplugged from the power source and the operating button is “OFF” before inserting or removing attachments. 1. Fit the processor bowl and spindle as described previously on page 4. 2.
- Page 9 Slicing & Shredding Blades CAUTION: Make sure that the unit is unplugged from the power source and the operating button is “OFF” before inserting or removing attachments. 1. Place the blade of your choice on the blade holder (17). Inserting the longer tab on the side of the blade first.
- Page 10 Juice Extractor CAUTION: Make sure that the unit is unplugged from the power source and the operating button is “OFF” before inserting or removing attachments. 1. Fit the processor bowl as detailed previously (page 4). 2. Fit the juice extractor/filter (28) into the processor bowl. 3.
- Page 11 Blender (8) CAUTION: Make sure that the unit is unplugged from the power source and the operating button is “OFF” before inserting or removing attachments and before cleaning. 1. Remove the processor bowl and lid. 2. Remove the safety cover (2). This can only be done once the processor lid has been removed.
- Page 12 RE-SETTABLE THERMAL SAFETY DEVICE Your EP90 Food Processor has been designed with a unique safety system which prevents damage to the unit’s motor and drive system, should you inadvertently overload your appliance. The safety system will automatically cut the electric power to the appliance when the device senses an overload or excessive temperature in the motor or drive system.
-
Page 13: Cleaning And Maintenance
CLEANING AND MAINTENANCE CAUTION: Make sure that the unit is unplugged from power source and control button is on “OFF” before inserting or removing any attachments and before cleaning. • Never immerse the unit, cord or plug in water or any other liquid. •... -
Page 14: One (1) Year Limited Warranty
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes.