Page 1
Food Processing Center Use and Care Instruction Manual Model EKP110 Read and Understand Instruction Manual Before Use EURO-PRO Operating LLC Boston, MA, 02465 1 (800) 798-7398 www.euro-pro.com...
11. Keep hands and utensils away from moving blades or discs while processing food to reduce the risk of severe injury to persons or damage to the food processor. A scraper may be used but must be used only when the food processor is not running.
Page 3
Congratulations! As the owner of a new Food Processing Center, you are about to use a very versatile and powerful kitchen appliance that will quickly become an indispensable item in your kitchen. Euro-Pro products are engineered to meet the highest quality standards and are designed to offer the ultimate in ease of operation and convenience.
Page 4
Food Processing Center MAIN COMPONENTS AND ACCESSORIES Processor Body Safety Cover Safety Cover/Blender Location On/Off Speed Control Dial Pulse Button Drive Shaft Storage Compartment Blender Blender Lid 10. Measuring Cap 11. Processor Bowl 120V., 60 Hz., 600 Watts 12. Spindle 13.
Page 5
Spatula Storage Slide the spatula (16) into the slot provided on the side of the processor body (1). Cord Storage The power supply cord can be stored by feeding it into the opening at the back of the food processor body.
Page 6
It is only intended to be used for short “bursts” of processing or blending. Operating the Food Processor Setting up 1. CAUTION: Make sure that the unit is unplugged from power source and operation button is on “OFF”...
Page 7
• Do not leave the appliance unsupervised when it is operating, i.e. when it is “ON”. 7. Never feed by hand. Always use the food pusher (14) to push food into the food processor bowl (11) through the feeder tube.
Page 8
Plastic Dough Blade (25) CAUTION: Make sure that the unit is unplugged from the power source and the operating button is “OFF” before inserting or removing attachments. 1. Fit the processor bowl and spindle as described previously on page 4. 2.
Page 9
Slicing & Shredding Blades CAUTION: Make sure that the unit is unplugged from the power source and the operating button is “OFF” before inserting or removing attachments. 1. Place the blade of your choice on the blade holder (17). Inserting the longer tab on the side of the blade first.
Page 10
Juice Extractor CAUTION: Make sure that the unit is unplugged from the power source and the operating button is “OFF” before inserting or removing attachments. 1. Fit the processor bowl as detailed previously (page 4). 2. Fit the juice extractor/filter (28) into the processor bowl. 3.
Page 11
Blender (8) CAUTION: Make sure that the unit is unplugged from the power source and the operating button is “OFF” before inserting or removing attachments and before cleaning. 1. Remove the processor bowl and lid. 2. Remove the safety cover (2). This can only be done once the processor lid has been removed.
RE-SETTABLE THERMAL SAFETY DEVICE Your Euro-Pro Food Processing Center has been designed with a unique safety system which prevents damage to the unit’s motor and drive system, should you inadvertently overload your appliance. The safety system will automatically cut the electric power to the appliance when the device senses an overload or excessive temperature in the motor or drive system.
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes.