Zoom Frame Af/Zoom Af - Olympus E-M5 Instruction Manual

Zoom frame AF/zoom AF

You can also zoom in on an area of the image in the monitor and adjust focus.
Choosing a high zoom ratio allows you to use autofocus to focus on a smaller area
than is normally covered by the AF target. You can also position the focus target more
precisely.
I S O
200
250 250 F5.6 0.0 0.0
Shooting display
1
Before proceeding, use [Button Function] (P. 86) to assign [a] to a
button.
Press the a button to display the zoom frame.
2
• If the camera was focused using autofocus
just before the button was pressed, the
zoom frame will be displayed at the current
focus position.
• Use FGHI to position the zoom frame.
• Press the INFO button and use FG to
choose the zoom ratio.
Press the U button again to zoom in on the zoom frame.
3
• Use FGHI to position the zoom frame.
• Rotate the dial to choose the zoom ratio.
4
Press the shutter button halfway to initiate autofocus.
• The zoom is cancelled.
• If [mode2] is selected for [LV Close Up Mode] (P. 88), pressing the shutter button will
not cancel zoom and the camera will focus continuously while the shutter button is
pressed halfway.
#
Cautions
• Zoom is visible only in the monitor and has no effect on the resulting photographs.
Q / / a Q
a a
I S O
200
L N
HD
01:02:03 01:02:03
250 F5.6 0.0 250 0.0
30 30
Zoom frame AF
a
(Press and hold)
a a
L N
HD
01:02:03 01:02:03
a a
30 30
Comparison of AF and
zoom frames
Zoom AF
5x
7x
10x
14x
1
EN 45