Table of Contents
Advertisement
'D ®
,_
WARNING:
Inspect the area be-
fore starting the unit. Remove all de-
bris and hard objects such as rocks,
glass, wire, etc. that can ricochet, be
thrown, or otherwise
cause injury or
damage
during operation.
• Do not use a cutting blade that is
bent, warped,
cracked,
broken or
damaged
in any other way. Have
worn or damaged
parts replaced by
your Sears Service Center.
• Always keep unit in front of your
body.
Keep all parts of your body
away from the cutting blade.
• Keep the cutting blade and air vents
clear of debris.
POLE PRUNER
SAFETY
WARNING:
The reciprocating
blade/rotating
chain can cause severe
injury. Inspect the unit before use.
Do
not operate unit with a bent, cracked
or dull blade or dull chain.
Keep away
from the blade/chain.
WARNING:
The reciprocating
blade/rotating chain is sharp. Do not
touch. To prevent serious injury, always
stop engine and ensure blade/chain
has stopped moving, disconnect
spark
plug, and wear gloves when changing
or handling the blade or chain.
,_
WAR NI N G:
A coasting blade/ro-
tating chain can cause injury while it
continues to move after the engine is
stopped.
Maintain proper control of the
unit until the blade/chain has completely
stopped moving. Keep hands, face and
feet at a distance from all moving parts.
Do not attempt to touch or stop the
blade or chain when it is moving.
_/LWARNING:
Falling objects can
cause severe head injury. Wear head
protection when operating
this unit
with a pole pruner attachment.
,_
WARNING:
To prevent serious
injury, do not use more than one boom
extension
with a pole pruner attach-
ment.
WARNING:
Keep the pruner
away from power lines or electrical
wires.
• Only use for pruning limbs or
branches
up to 6 inches (15 cm) in
diameter.
• Do not operate the unit faster than
the speed needed to prune. Do not
run the unit at high speed when not
pruning.
• Always stop the unit when work is
delayed
or when walking from one
cutting location to another.
• If you strike or become entangled
with a foreign object, stop the engine
immediately
and check for damage.
Have any damage
repaired by a
Sears Service
Center before at-
tempting further operations.
Discard
blades that are bent, warped,
cracked
or broken.
• Stop the unit immediately
if you feel
excessive
vibration.
Vibration
is a
sign of trouble.
Inspect thoroughly
for loose nuts, bolts or damage
be-
fore continuing.
Contact Sears Ser-
vice for repair or replacement
of af-
fected parts as necessary.
Hide quick links:
Advertisement
Table of Contents
