Garden Oasis HLDS01-PCKM Owner's Manual page 9

ASSEMBLY INSTRUCTIONS
8. WARNING:Remove protective cover before
assembling.
Note: If necessary for proper alignment of reflector
sections, loosen each bolt prior to further assembly
and retighten after sections are aligned.
9. 9-1.Slide two reflector panels together.
Insert one bolt M6 X 10 (II). Slide one washer Φ 6
(HH) over threaded end of bolt M6 X 10 (II) and screw
on cap nut (JJ) loosely.
Hardware Used
Washer Φ 6
HH
II
Bolt M6 X 10
JJ
Cap nuts
9-2. Slide reflector plate onto reflector panels.
Insert one bolt M6 X 10 (II). Slide one washer Φ 6
over threaded end of bolt M6 X 10 (II) and screw on
cap nut (JJ) loosely. Repeat procedure to complete
the assembly of all four sections. Fully tighten all of
the bolts in the rolled edge.
x 9
x 9
x 9
8
9-1
JJ
HH
II
9-2
JJ
HH
II
7
A
B
TT
TT