1. Manuals
  2. Brands
  3. Garden Oasis Manuals
  4. Patio Heater
  5. HLDS01-PCKM
  6. Owner's manual

Garden Oasis HLDS01-PCKM Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Please refer to part numbers when reordering
For questions or comments about product:
Call toll-free: 1-888-775-1330
Made in / Hech en CHINA
Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
sears.com
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com
Product Code: D71 M83952
OWNER'S
KSN: 0-02475653-8
UPC Code: 872313150815
MANUAL
PATIO HEATER
R
Date of purchase: _____/ _____/ _____
R

Advertisement

Table of Contents
loading

Summary of Contents for Garden Oasis HLDS01-PCKM

  • Page 1 Product Code: D71 M83952 OWNER’S KSN: 0-02475653-8 UPC Code: 872313150815 MANUAL Please refer to part numbers when reordering For questions or comments about product: Call toll-free: 1-888-775-1330 PATIO HEATER Made in / Hech en CHINA Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179 sears.com Date of purchase: _____/ _____/ _____ See our extensive assortment of outdoor living products...

  • Page 2: Safety Information

    Retain the instructions for future reference SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any questions regarding the product, please call customer service at 1-888-775-1330, 7 a.m. - 4 p.m., PST, Monday - Friday. This manual contains important information about the assembly, operation and maintenance of this patio heater.
  • Page 3 SAFETY INFORMATION DANGER WARNING CARBON MONOXIDE HAZARD This appliance can produce carbon monoxide which has no odor. Using it in an enclosed • This product is fueled by propane gas. Propane gas space can kill you. Never use this is invisible, odorless, and flammable. An odorant is appliance in an enclosed space normally added to help detect leaks and can be such as a camper, tent or home.

  • Page 4: Package Contents

    PACKAGE CONTENTS QUANTITY Reflector Panel Reflector Plate Reflector Stud Head Assembly Screw Coupler Tabletop Tightening Spacer Fastening Nut Deck Ring Reinforced Ring Cylinder Housing Post Gas Hose Regulator Base Wheel Kit...
  • Page 5 HARDWARE CONTENTS (shown actual size) Screw Flange Small flat Washer Φ6 M5 X 8 Bolt Bolt M6 X 10 washer Φ6 Qty. 9 Washer Φ8 Qty. 4 Reflector M8 x 16 Qty. 2 Qty. 4 Qty. 4 Qty. 9 spacer Qty.
  • Page 6 ASSEMBLY INSTRUCTIONS 1. Attach wheel assembly (P) to base (O). Line up holes in wheel bracket with corresponding holes in base, insert two bolts M8 x 16 (BB) through holes, and finger tighten Fill sand two M8 flange nuts (AA). Be sure that the wheel assembly is parallel to the base, and fully tighten bolts.
  • Page 7 ASSEMBLY INSTRUCTIONS 4. Attach post to cylinder housing using the reinforced ring (NN), four M6 X 10 bolts (DD) and small flat washers Φ6 (EE). Fasten them and cover with the deck ring (OO). Hardware Used Bolt M6 X 10 Small flat washer Φ6 Reinforced ring Deck ring...
  • Page 8 ASSEMBLY INSTRUCTIONS 6. Attach reflector spacers (FF) and three washers Ø8 (GG) to screen cover. Tighten the reflector spacers. Hardware Used Reflector Spacer Washer Φ8 7. Attach head assembly to post. 7-1. Unscrew four stainless steel bolts (LL). Hardware Used Stainless steel bolt 7-2.
  • Page 9 ASSEMBLY INSTRUCTIONS 8. WARNING:Remove protective cover before assembling. Note: If necessary for proper alignment of reflector sections, loosen each bolt prior to further assembly and retighten after sections are aligned. 9. 9-1.Slide two reflector panels together. Insert one bolt M6 X 10 (II). Slide one washer Φ 6 (HH) over threaded end of bolt M6 X 10 (II) and screw on cap nut (JJ) loosely.
  • Page 10 ASSEMBLY INSTRUCTIONS 10. Support heater. Slide three washers washer Φ8 (GG) over threaded end of spacer. Locate reflector assembly on 3 spacers. Install three washers Φ8 on spacers and securely tighten wing nuts (KK) but do not overtighten. Hardware Used Washer Φ8 Wing nut 11.
  • Page 11 ASSEMBLY INSTRUCTIONS A dented, rusted or damaged propane cylinder may be hazardous and should be checked by your cylinder supplier. Never use a propane cylinder with a damaged valve connection. The propane cylinder must be constructed and marked in accordance with the specifications for LP gas cylinders of the U.S.
  • Page 12 OPERATION INSTRUCTIONS Leak Check WARNING • Perform all leak tests outdoors. • Extinguish all open flames. • NEVER leak test when smoking. • Do not use the heater until all connections have been leak tested and do not leak. Hose / Regulator Regulator / Cylinder connection connection...
  • Page 13 OPERATION INSTRUCTIONS DANGER • CARBON MONOXIDE HAZARD • For outdoor use only. Never use inside house, or other unventilated or enclosed areas. This heater consumes air (oxygen). Do not use in unventilated or enclosed areas to avoid endangering your life. Caution: Do not attempt to operate until you have read and understand all General Safety Information in this manual and all assembly is complete and leak checks have been performed.
  • Page 14 OPERATION INSTRUCTIONS 5. Push and release the igniter button until pilot flame is visible through viewing hole. 6. Once the pilot is lit, continue to depress the control knob for 30 seconds. 7. If the pilot does not stay lit, repeat steps 4 to 6. 8.
  • Page 15 OPERATION INSTRUCTIONS WARNING FOR YOUR SAFETY Be careful when attempting to manually ignite this heater. Holding in the control know for more than 10 seconds before igniting the gas will cause a ball of flame upon ignition. When heater is ON: Emitter screen will become bright red due to intense heat.

  • Page 16: Care And Maintenance

    OPERATION INSTRUCTIONS 9. Heater is away from gasoline or other flammable liquids or vapors. 10. Heater is away from windows, air intake openings, sprinklers and other water sources. 11. Heater is at least 24 in. on top and at least 36 in. on sides from combustible materials. 12.
  • Page 17 CARE AND MAINTENANCE Gas odor with extreme yellow tipping of flame. Heater does NOT reach the desired temperature. Heater glow is excessively uneven. Heater makes popping noises. Spiders and insects can nest in burner or orifices. This dangerous condition can damage heater and render it unsafe for use.

  • Page 18: Troubleshooting

    TROUBLESHOOTING If you have any questions regarding the product, please call customer service at 1-888-775-1330, 7 a.m. - 4 p.m. (PST), Monday - Friday. PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Cylinder valve is closed Open valve Clean or replace orifice or Blockage in orifice or pilot tube pilot tube Open gas line and bleed it...

  • Page 19: One-Year Limited Warranty

    ONE-YEAR LIMITED WARRANTY CUSTOMERS IN USA Do not return this product to the store where you purchased it. Please call 1-888-775-1330 for assistance. CUSTOMERS IN CANADA IMPORTANT Only return this product to the store if it was purchased within 90 days. If you have problems after 90 days of purchase, please CALL 1-888-775-1330 DATED PROOF OF PURCHASE REQUIRED FOR WARRANTY SERVICE.

  • Page 20: Replacement Parts List

    REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-888-775-1330, 7 a.m. - 4 p.m., PST, Monday - Friday. QUANTITY Reflector Panel Reflector Plate Reflector Stud Head Assembly Screw Coupler Tabletop Tightening Spacer Fastening Nut Deck Ring Reinforced Ring Cylinder Housing Post...

Table of Contents