FujiFilm FINEPIX A500 Owner's Manual page 107

NO IMAGE An attempt was made to transfer images from the It is impossible to copy.
xD-Picture card or internal memory that memory
NO IMAGE was empty,
CAN NOT TRIM An attempt was made to trim a O.3M image. The image cannot be trimmed,
• An attempt was made to trim an image shot using The image cannot be trimmed,
CAN NOT TRIM a camera other than FinePix A400 / FinePix A500.
• The image is damaged,
Prints were specified for lOOO or more frames in the The maximum number of frames for which prints can
DPOF frame settings, be specified on the same xD-Picture Card is 999.
DPOF FILE ERROR Copy the images for which you want to order prints
onto another xD-Picture Card and then specify the
DPOF settings.
CAN NOT SET DPOF An attempt was made to specify DPOF settings for DPOF printing cannot be used with this image
an image that is not supported by DPOF. format,
CAN NOT SET DPOF
COMMUNICATION The camera is not connected to a PC or printer. Check that the USB cable (mini-B) is connected
ERROR correctly.
Check that your printer is turned on.
Displayed for PictBridge. Check that the printer is not out of paper or out of
ink.
PRINTER ERROR Turn the printer off briefly and then turn it back on.
Refer to the user manual supplied with your
printer.
Displayed for PictBridge. Check that the printer is not out of paper or out of ink.
PRINTER ERROR Printing automatically restarts when the error is
RESUME? cleared, If the message still appears after checking,
_ress MENU/OK to restart printing.
107
[Conti nued_