Craftsman 917.275044 Owner's Manual
  1. Manuals
  2. Brands
  3. Craftsman Manuals
  4. Lawn Mower
  5. 917.275044
  6. Owner's manual
Craftsman 917.275044 Owner's Manual

Craftsman 917.275044 Owner's Manual

Garden tractor 23.0 hp, 50"mower electric start automatic transmission
Hide thumbs
Table of Contents

Advertisement

Quick Links

Owner's Manual
Icnn=:TSmnm+l
GARDEN TRACTOR
23.0 HP, 50"Mower
Electric Start
Automatic Transmission
Model No.
917.275044
I
_
This product
has a low emission
engine which
operates
differently
I
I
from previously
built engines.
Before
you start the engine,
read
I
and understand
this Owner's
Manual.
CAUTION:
Read and follow all
Safety Rules and Instructions
before operating this equip-
ment.
For answers to your questions
about this product, Call:
1-800-659-5917
Sears Craftsman Help Line
5 am- 5 pro, Mon- Sat
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Visit our Craftsman website: www.sears.com/craftsman

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 917.275044 and is the answer not in the manual?

Questions and answers

Related Manuals for Craftsman 917.275044

Summary of Contents for Craftsman 917.275044

  • Page 1 Call: Read and follow all Safety Rules and Instructions 1-800-659-5917 Sears Craftsman Help Line before operating this equip- 5 am- 5 pro, Mon- Sat ment. Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. Visit our Craftsman website: www.sears.com/craftsman...
  • Page 2 Sears Service ...... Back Cover LIMITED WARRANTY ON CRAFTSMAN RIDING EQUIPMENT For two (2) years from the date of purchase, if this Craftsman Riding Equipment maintained, lubricated and tuned up according to the instructions in the owner's manual, Sears will repair or replace...
  • Page 3 IMPORTANT= This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. • Do not mow in reverse unless absolutely Look for this symbol to point out necessary.
  • Page 4 • Never carry children. They may fall off • Mow up and down slopes, not across. and be seriously injured or interfere tree • Remove obstacles such as rocks, with safe machine operation. limbs, etc. • Never allow children to operate •...
  • Page 5 Remove obstacles such as rocks, tree • Be sure the area is clear of other limbs, etc. people before mowing. Stop machine Watch for holes, ruts, or bumps. anyone enters the area. Uneven terrain could overturn • Never carry passengers or children machine.
  • Page 6 Please read and retain this manual. PRODUCT SPECIFICATIONS instructions will enable you to assemble 3asoline 5 Gallons and maintain your tractor properly. Always 3apacity Unleaded observe the "SAFETY RULES". _nd Type: Regular REPAIR AGREEMENT ::)il Type SAE 10W30 A Repair Agreement is available on this (above 32°F) product.
  • Page 7 Steering Wheel Steering Sleeve Steering Wheel Insert Steering Sleeve Extension Bubble Leveling (1) Washer keve_ Wrench Mower 17/32 x 1-3/16 x 12 Gauge (1) Knob _ Mower (5) Retainer Springs (2) Flanged oop) 2) Retainer Springs (1)Front Plate \" single loop) Assembly _P'_Et_ Gauge Wheels...
  • Page 8 Video Cassette Slope Sheet Keys (2) Keys (1) Oil Drain Tube Your new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely.
  • Page 9 Lower seat into operating position _steedng sit in seat. ",_ Wheel Insert Slide seat until a comfortable position is reached which allows you to press - Hex Bolt clutch/brake pedal all the way down. ¢P--_Lock Washer 8. Get off seat without moving its Steering Larg.e Flat...
  • Page 10 1. Be sure all the above assembly steps NOTE: To assist in locating hole in have been completed. flanged pin, the hole in pin is inline with notch on head of pin. If necessary, move Check engine oil level and fill fuel tank with gasoline.
  • Page 11 Front Electric Chassis Susper_ Clutch Bracket Front Double Loop Brackets Pulley Suspension Mower Retainer Arms Bracket Front Plate Idler Shouk_er Bolt Wheel Single Loop Retainer Washer Springs 3/8-16 Double Center Loop Locknut Retainer Spdng Deflector ' Shield Use Pliers For Double Loop Retainer Springs Retainer Spring...
  • Page 12 These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. I- ;I BAT[ERY CAUTION OR REVERSE FORWARD FAST SLOW WARNING ENGINE ON ENGINE OFF OIL PRESSURE LIGHTS ON OVER TEMP LIGHT MOWER LIFT FUEL CHOKE...
  • Page 13 KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. Light Switch Ammeter Ignition Position Switch...
  • Page 14 The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend standard safety glasses or a wide vision safetyl...
  • Page 15 These heightsare TO STOP MOWER BLADES - approximate and may vary depending upon soil conditions, disengage attachment clutch control. height of grass and types of grass being _CAUTION: Do not operate the mower mowed. without either the entire grass catcher, on •...
  • Page 16 Transmission Engaged _CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame. IMPORTANT: When operating in tem- peratures below 32°F(0°C), use fresh, clean winter grade gasoline to help insure good cold weather starting. _CAUTION: Alcohol blended fuels (called gasohol or using ethanol or...
  • Page 17 WARM WEATHER STARTING (50 ° F and • The attachments can be used during above) the engine warm-up period after the transmission has been warmed up and 7. When engine starts, slowly push may require the choke control choke control in until the engine pulled out slightly.
  • Page 18 8. Slowly move motion control lever forward, after the tractor moves approximately five (5) feet, slowly move motion control lever to reverse position. After the tractor moves approximately five (5) feet return the motion control lever to the neutral (N) position.
  • Page 19 FILL IN DATES DATES cC_: BTir::;, eOp:r :: °n _V w Check Operator Presence Interlock Systems Check for Loose Fasteners Sharped/Replace Mower Blades Lubrication Chad Check Battery Level Clean Battery and Terminals Check Transaxle Cooling Check V-Belts Check Engine Oil Level Change Engine Oil (with oil filter) I1_1...
  • Page 20 TRACTOR IMPORTANT: To ensure proper assembly, center hole in blade must align with star Always observe safety rules when on mandrel assembly. performing any maintenance. Reassemble hex bolt, lock washer BRAKE OPERATION and flat washer in exact order as If tractor requires more than six (6) feet shown.
  • Page 21 ENGINE • Keep battery and terminals clean. • Keep battery bolts tight. LUBRICATION • Keep small vent holes open. Only use high quality detergent oil rated • Recharge at 6-10 amperes for 1 hour. with API service classification SF-SJ, NOTE" The original equipment battery on Select the oil's SAE viscosity grade your tractor is maintenance...
  • Page 22 8. Use gauge CLEAN AIR SCREEN on oil fill cap/dipstick checking level. Insert dipstick into the Air screen must be kept free of dirt and tube and rest the oil fill cap on the chaff to prevent engine damage from tube.
  • Page 23 CLEANING We do not recommend using a garden hose to clean your tractor unless the • Clean engine, battery, seat, finish, etc. electrical system, muffler, air filter and of all foreign matter. carburetor are covered to keep water out. • Keep finished surfaces and wheels free Water in engine can result in a shortened...
  • Page 24 FRONT-TO-BACK ADJUSTMENT SIDE-TO-SIDE ADJUSTMENT WITH IMPORTANT: DECK MUST BE LEVEL BUBBLE LEVEL SIDE-TO-SIDE. if the following front-to- NOTE: If necessary, check side-to-side back adjustment is necessary, be sure to surface below tractor for levelness with a adjust both front links equally so mower long board and the bubble level.
  • Page 25 TO REPLACE MOWER DRIVE BELT MOWER DRIVE BELT INSTALLATION Install belt in both idlers. Make sure MOWER DRIVE BELT REMOVAL belt is in both belt keepers at the idlers 1. Park tractor on a level surface. as shown. Engage parking brake.
  • Page 26 TO REPLACE MOWER BLADE DRIVE 7. Check secondary idler arm and idler BELT to see that they rotate freely. Be sure spring is hooked in secondary Park the tractor on level surface. Engage idler arm and sway-bar bracket. parking brake. Install new belt in lower groove of L.H.
  • Page 27 TO ADJUST ATTACHMENT CLUTCH BELT INSTALLATION The electric clutch should provide years 1. Install new belt around engine pulley of service. The clutch has a built-in brake first, then around transaxla pulley and that stops the pulley within 5 seconds. lastly into all the idler pulleys.
  • Page 28 NOTE: To seal tire punctures and prevent TOE-IN TO CHECK flat tires due to slow leaks, purchase and 1. Position front wheels straight ahead. use tire sealant from Sears. Tire sealant Measure distance between wheels also prevents tire dry rot and corrosion. front and rear of tires (dimensions "A"...
  • Page 29 TO REMOVE HOOD AND GRILL AS- REPLACING BA'FrERY SEMBLY 41_CAUTION: Do not short battery 1. Raise hood. terminals by allowing a wrench or any 2. Unsnap headlight wire connector. other object to contact both terminals at 3. Stand in front of tractor. Grasp hood at the same time.
  • Page 30 PRELIMINARY SEI-IING TO ADJUST CHOKE CONTROL The choke control has been preset at the Be sure you have a clean air filter, and factory and adjustment should not be the throttle control cable is adjusted necessary, check adjustment as de- properly (see "TO ADJUST THROt-ILE CONTROL...
  • Page 31 Immediately prepare your tractor alcohol blended fuels (called gasohol storage at the end of the season or if the using ethanol or methanol) can attract tractor will not be used for 30 clays or moisture which leads to separation more. formation of acids during storage.
  • Page 32 TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center CAUSE CORRECTION PROBLEM 1. Fill fuel tank. Out of fuel. Will not start See "TO START ENGINE" Engine not "CHOKED" properly. in Operation section. Wait several minutes before Engine flooded.
  • Page 33 TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center PROBLEM CAUSE CORRECTION Loss _power Cutting too much grass/too 1. Set in "Higher Cut" position/ fast. reduce speed. Throttle in "CHOKE" Adjust throttle control. position. Clean underside of mower Build-up of grass,...
  • Page 34 TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center CORRECTION CAUSE PROBLEM 1. Obstruction in clutch 1. Remove obstruction. Mower blades will mechanism. not rotate 2. Worn/damaged mower Replace mower drive belt. drive belt. Frozen idler pulley. Replace idler pulley.
  • Page 35 TRACTOR - MODEL NUMBER 917.275044 SCHEMATIC BATTERY SOLENOID PTO SWITCH HEADLIGHTS POSITION CIRCUIT C ÷C=,B÷_ IGNITION SWITCH C+F_B+E,A÷D POSITION CIRCUIT "MAKE" RELAY _I+ G +A1 NONE ON+LIGHTS B+A1 L+A2 B + A1 NONE START 3 + S ÷A1 NOI_E REMC)VABLE NON-REMOVABLE WIRING INSULATED...
  • Page 36 TRACTOR - MODEL NUMBER 917.275044 ELECTRICAL...
  • Page 37 TRACTOR - MODEL NUMBER 917.275044 ELECTRICAL KEY PART DESCRIPTION 144927 Battery 74760412 Bolt Hex Head 1/4-20 x 3/4 7603J Tray, Battery 145211 Bolt 1/4-20 x 7.5 Zinc 150109 Hold down Battery Dash Mount 145769 Nut Push Nylon 1/4" 176138 Switch Interlock 175688 Harness Socket LightW/4152J 4152J...
  • Page 38 TRACTOR - MODEL NUMBER 917.275044 CHASSIS AND ENCLOSURES .157 141_ oa___q,, _,______6 156/__ >_30...
  • Page 39 TRACTOR - MODEL NUMBER 917.275044 CHASSIS AND ENCLOSURES PART DESCRIPTION 180372 Rail, FremeRH 175282 Drawbar,Gt 73680700 Nut, Lock 7/16 Unc 163976X428 Dash YTGT 2 Cyl 157882 Dash, LowerVgt One Piece 17720408 Screw, Thd Cut 1/4-20 x 1/2 145166 Support, Battery 175259X558 HoodAsm 121794X Cover, Access...
  • Page 40 TRACTOR - MODEL NUMBER 917.275044 GROUND DRIVE 117\ 153_ 122\ 117_ ..148 "145 _106 "107 _108...
  • Page 41 TRACTOR - MODEL NUMBER 917.275044 GROUND DRIVE KEY PART KEY PART DESCRIPTION DESCRIPTION ..Transaxle Hydro Gear 133835 Fastener ChristmasTree 331-3000 (See Braakdown) 141004 Bracket Shift 180642 Key Sq. 1/4 x 1/4 x 2.375 142918 O-Ring Asm Hydro Gear 7563R Washer Thrust Axle Harden 154739 Line Fuel Hydro 15"...
  • Page 42 TRACTOR - MODEL NUMBER 917.275044 STEERING 1313...
  • Page 43 TRACTOR - MODEL NUMBER 917.275044 STEERING KEY PART DESCRIPTION 159944X428 Wheel, Steering 178557 Axle Asm., Front 6855M Fitting,Grease 161849 Spindle Asm, LH 161848 SpindleAsm., RH 6266H Searing, Race Thrust Harden 121748X Washer 25/32 x 1-5/8 x 16 Ga. 12000029 Ring, Klip#T5304-75 121232X Cap, Spindle 74781044...
  • Page 44 TRACTOR - MODEL NUMBER 917.275044 ENGINE I SPARK ARRESTER KIT I _'_40 PART PART DESCRIPTION DESCRIPTION 10010500 Washer Split ..Engine (See Breakdown) Kohler Model No. CV674-75544 123487X Clamp Hose 149723 Muffler 17490636 Screw "N" 3/8-16 x 2-1/4 UNC 17490664 Screw'l-r 3/8-16 x 4 UNC 121361X Pulley V-Idler...
  • Page 45 TRACTOR - MODEL NUMBER 917.275044 SEATASSEMBLY KEY PART PART DESCRIPTION DESCRIPTION Seat 180598 121249X Spacer, Split Bracket, Pivot Seat 180166 123740X Spring,Cprsn 140675 Strap, Fender 123976X Nut, Lock 1/4 Lge Fig Gr. 5 145006 Clip, Push In, Hinged 19171912 Washer 17/32x 1-3/16xt2 Ga. Nut, Crownlock 3/8-16 Uric STD541437 166369...
  • Page 46 Decal Replacement 149516 Decal BatteryDNGR/PSN 160397 Decal V-Belt Schem ENG Asm 177415 Decal Hood Side Pnl 171702 Decal Hood RH Craftsman 177375 Decal Dash Panel 171703 Decal Hood LH Craftsman 164065 Decal Insert Strg 140837 Decal Brake Parking Saddle 138047...
  • Page 47 TRACTOR - MODEL NUMBER 917.275044 LIFT ASSEMBLY 42 43 KEY PART KEY PART DESCRIPTION NO. NO. DESCRIPTION 121006X Rod Asm., Lever 137150 Spdng, Compression Inf Hgt 180045 Shaft Asm., Lift Vgt 137167 Rod, Adj Lift 159189 Lever Asm., Lift Rh 138057 Knob, Inf 3/8-16 Unc 12000022...
  • Page 48 TRACTOR - MODEL NUMBER 917.275044 MOWER DECK...
  • Page 49 TRACTOR - MODEL NUMBER 917.275044 MOWER DECK KEY PART KEY PART DESCRIPTION DESCRIPTION 181606 Mower DeckWeldment 50 131494 Pulley, Idler Flat STD541431 Nut, Crownlock5/16-18 174375 Pulley, Driven 72110506 Bolt, Carriage 5/16-18 x 3/4 S'rD5.33107 Bolt,Carr.5/16-18Uncx3/4 7631J Runner, Mower LH 136460 Arm, Idler Secondary 138457 Bracket Asm, Sway Bar...
  • Page 50 TRACTOR - MODEL NUMBER 917.275044 TRANSAXLE-MODELNUMBER331-3000 __53...
  • Page 51 TRACTOR- MODEL NUMBER 917.275044 TRANSAXLE-MODEL NUMBER 331-3000 KEY PART KEY PART DESCRIPTION DESCRIPTION 161122 Main HousingAssembly 169535 Ball Brg 6205-1 Seal l"ld X 2.0472" X 0.375" 178317 R.H. Housing Assembly 161157 169522 Center Section Assembly 161153 Shaft, Axle Washer 161125 Spacer 142884 Gasket Matedal...
  • Page 52 TRACTOR - MODEL NUMBER917.275044 KOHLERENGINE-MODEL NUMBERCV674,TYPE NUMBER75544 CYLINDER HEAD, VALVE AND BREATHER 'r-- • _110 2 e...le RANKCASEJ .-01, _,.Jl _-----B...
  • Page 53 TRACTOR - MODEL NUMBER 917.275044 KOHLER ENGINE-MODEL NUMBER CV674, TYPE NUMBER 75544 CRANKCASE HEAD/VALVE/BREATHER PART PART DESCRIPTION DESCRIPTION 24-032-01-S Seal, oil front 24-033-03-S Kit, breather cover w/ Crankcase gasket (Includes 2, 3) (USE: Miniblock 24 24-041-23-S Gasket, breather 782 14) 24-096-5g-s Cover, breather Fitting...
  • Page 54 TRACTOR - MODEL NUMBER 917.275044 KOHLER ENGINE-MODEL NUMBER CV674, TYPE NUMBER 75544 IGNITION/ELECTRICAL BLOWER HOUSING AND BAFFLESJ 0--, 1- I _p-s . |/I AIR INTAKE...
  • Page 55 TRACTOR - MODEL NUMBER 917.275044 KOHLERENGINE-MODEL NUMBERCV674,TYPE NUMBER75544 IGNITION/CHARGING BLOWER HOUSING & BAFFLES PART PART DESCRIPTION DESCRIPTION 54-755-15-S Kit, grass screen 24-027-20-S Housing, blower (Includes 2-4,and 24 (Includes 2-4) 113 18-S) 24-100-01-S Nut, plastic (3) M-403025-S Screw, hex. cap 25-139-16-S Plug, button 9/16"...
  • Page 56 TRACTOR - MODEL NUMBER 917.275044 KOHLER ENGINE-MODEL NUMBER CV674, TYPE NUMBER 75544 ENGINE CONTROLS • STARTING SYSTEM . __, OIL PAN / LUBRICATION lOJ_ o_,rl...
  • Page 57 TRACTOR - MODEL NUMBER 917.275044 KOHLER ENGINE-MODEL NUMBER CV674, TYPE NUMBER 75544 STARTING SYSTEM OIL PAN/LUBRICATION PART PART DESCRIPTION DESCRIPTION M-839080-S Screw, hex. flange 24-199-07-S Pan, oil assembly Max1.25x80 (Includes 2-10) 25-098-08-S Starter, solenoid shift M-645025-S Screw, hex. flange (Includes 4-7) M6x1.0x25 M-841080-S...
  • Page 58 TRACTOR - MODEL NUMBER 917.275044 KOHLER ENGINE-MODEL NUMBER CV674, TYPE NUMBER 75544 EXHAUST I CRANKSHAFT FUELSYSTEM] "-rJ j'.i_ / CRANKSHAFT FUEL SYSTEM PART PART DESCRIPTION DESCRIPTION 24-853-61-S 24-014-72-S Kit, carburetor w/ Crankshaft (includes 52-139-09-S Plug, cup _askets ncludes 2-4) EXHAUST 24-041-15-S Gasket, carburetor...
  • Page 59 SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION 1. Fold this page along dotted line Indicated above. 2. Hold page before you so that its left edge is vertically parallel to a tree trunk or other upright structure. 3. Sight across the fold In the direction of hill slope you want to measure. 4.
  • Page 60 For repair of major brand appliances in your own home... no matter who made it, no matter who sold it! For repair of carry-in products like vacuums, lawn equipment, and electronics, call for the nearest Sears Parts and Repair Center. 1-800-488-1222 dayorrt3ht (U.SA.or_) _..seat_com...

Table of Contents

Save PDF