Oven Temperature - Frigidaire FEF353BFDB Owner's Manual

Coil elements electronic oven controls and a self-cleaning oven interior
Table of Contents

Advertisement

Adjusting
Oven
Temperature
Note: The adjustments
made will not
change the se f-c eaning temperature.
The temperature
in the oven has been set at the factory. When first using the
oven, be sure to follow
recipe times and temperatures.
If you think the oven
is too hot or too cool, the temperature
in the oven can be adjusted.
Before
adjusting,
test a recipe by using a temperature
setting that is higher or lower
than the recommended
temperature.
The baking results should help you to
decide how much of an adjustment
is needed.
To Adjust
Oven Temperature
(Figure
1)
1.
With the dial set to OFF, press and hold _T"-,]
for 30 seconds until
a single beep is heard.
2.
Within 5 seconds, turn the Temperature Control Knob clockwise
to either
the High (HI) or Low (LO) Broil setting. Select High Broil (HI) to increase the
temperature
or Low Broil (LO) to decrease the temperature.
3.
The temperature
can be adjusted up or down 35°F, in 5°Fsteps, by pressing
START. Adjust until
the desired amount
of offset is indicated
by the
indicator
lights as follows:
A flashing "OVEN" indicator light indicates a positive offset, while a flashing
"LOCK" indicator light indicates a negative offset. The lights will flash once
for each 5°Fof offset. If no light is flashing, the oven control has the original
factory calibration,
and the offset is 0°F. Example: If the OVEN indicator
light is flashing three times and then pauses, the offset is +15°F,
4.
When you have made the desired
adjustment,
turn the Temperature
Control Knob to OFF.
To Adjust
Oven Temperature
(Figure
2)
1.
With the dial set to OFF, press and hold _
for 30 seconds until
a single beep is heard.
2.
Within 5 seconds, turn the Temperature Control Knob clockwise
to either
the High Broil (HI) or Low Broil (LO) setting.
3.
The display now indicates the amount
of degrees offset between
the
original factory temperature
setting and the current temperature
setting.
If the oven control has the original factory calibration,
the display will read
"00/'
4.
The temperature
can now be adjusted up or down 35°F, in 5°F steps, by
pushing and holding
(_
or _.
Adjust until the desired amount
of
offset appears in the display.
5.
When you have made the desired
adjustment,
turn the Temperature
Control Knob to OFF.
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fef353bfddFef353bfdaFef353bfdcFef353bfde

Table of Contents