Storage; Maintenance Accessories - Craftsman 358.356081 Operator's Manual

H. STORAGE
When your saw is to be stored for over 30 days
always:
1. Drain fuel tankin asafe manner (see "Important
Points," page10).
2: Start Engine and allow to run at idlespeed
until the engine stops.
NOTE: This will remove most of the fuel from
the fuel system,
Wear protective gloves when han-
dling the chain. The chain is sharp and can
Cut you even_hen it is not moving.
I. MAINTENANCE ACCESSORIES
3. Drain oil tank.
4. Remove, clean, and dry the bar and chain.
5. Store the chain in a container filled with oil
to prevent rust.
6_ Apply a coating of oil to the entire surface of
the bar and wrap it in heavy paper, cloth or
plastic.
7. Clean the outside surfaces of the engine.
8. Store the saw in a dry place, out of the reach
of children and away fromwhere fuel vapors
can reach open flames from hot water
heaters, furnaces, etc.
Ava_ab_ethr_ughy_urneamstSeamSt_m_ata_gSa_es_ice_rServiceCente_butmayn_tbef_rnished
withyoursaw.
Key No. Part No. Catalog No.
1 55046 7! -36565
2 -- 71-36526
-- 71-36523
3 -- 71-36557
4 51259 71-3642
Part No. Catalog No.
30073 71-3640
-- 71-36711
-- 71-36627
-- 71-36555
-- 71-36554
-- 71-36556
1 44209 71-36370
Description
File Guide
File (7/32" Dia.) Twin Pack
File (7/32" Dia.) - 12 pack
Depth Gauge Tool
Xtra GUARD ®Chain (72SG-66) -
(requires 7/32" dia. file)
Description
Spark Plug-Champion CJ-8Y
Replacement Recoil Cord
Carrying Case
2-Cycle Engine Oil
Bar and Chain Lubricant (gallon size)
Bar and Chain Lubricant (quart size)
Guide Bar- 18"- Lo-Kick ®
22