Craftsman GARAGE STORAGE SOLUTIONS Operator's Manual page 7

f-
STEP 6:
©
AA
BB
CC
• Attach E to C, as shown, using AA, BB, and CC. Both parts
have multiple slots to enable E to be flush with the wall and
aligned with a stud.
BB
f
STEP 7:
Workbench Backwall MUST be attached to a stud in
a wood frame wall. Failure to do so may cause
personal injury or product damage
Hardware provided for wood frame wall use only.
Concrete or other surfaces will require other
hardware (not provided). Use appropriate hardware
per your local building codes. Failure to secure the
backwall to a wall may cause personal injury or
product damage.
• Align E with a stud.
• Drill 1/8" pilot hole.
• Attach E to the stud using FF.
¢!
III
FF
FF
J
,J