Olivetti D-COPIA 300MF Operation Manual page 160

Troubleshooting
Error Message
Scanner memory is
full.
Send Error.
Set the folding tray.
Set the folding unit.
Set the punch waste
box.
Set the waste toner
box.
Staple error.
Staple jam.
The memory card is
not formatted.
6-8
Checkpoints
–
Is the acceptable scanning
count exceeded?
–
Is the folding tray correctly
set to the 3,000-sheet
capacity document finisher?
Is the folding unit correctly
set to the 3,000-sheet
capacity document finisher?
–
–
–
–
Is the memory card
formatted?
Corrective Actions
Scanning cannot be performed due
to insufficient memory of scanner.
Job is canceled. Press [End].
Press [Continue] to print, send or
store the scanned pages. Press
[Cancel] to cancel printing, sending
or storing.
Job is canceled. Press [End].
Set the folding tray correctly to the
3,000-sheet capacity document
finisher. For details, refer to the
Operation Guide of the 3,000-
sheet capacity document finisher.
Set the folding unit correctly to the
3,000-sheet capacity document
finisher. For details, refer to the
Operation Guide of the 3,000-
sheet capacity document finisher.
The punch waste box of the
document finisher or 3,000-sheet
capacity document finisher is not
set correctly.
Follow the instruction on the touch
panel to set the punch waste box
correctly.
The waste toner box is not set
correctly. Set it correctly.
If a staple error occurs, the
machine will stop and the
corrective action will be indicated
on the touch panel.
Leave the machine on and follow
the instruction to take an
appropriate action.
If a staple jam occurs, the machine
will stop and the location of the jam
will be indicated on the touch
panel.
Leave the machine on and follow
the instruction to remove the
jammed staple.
Format the memory card.
Reference
Page
—
—
—
—
—
—
5-7
—
4-8
—
OPERATION GUIDE