Checking Remaining Toner And Paper - Olivetti D-COPIA 300MF Operation Manual

Basic Operation

Checking Remaining Toner and Paper

3-54
Follow the steps below to check remaining toner and paper on the touch
panel.
NOTE:
Size and type of paper loaded in each paper source can also be
checked.
1
Press the Status/Job Cancel key.
2 Press [Paper/Supplies].
3 Check the remaining toner of Toner Information and the remaining paper
of each paper source of Paper.
NOTE:
Remaining toner level is indicated by any of the 11 levels
between 100 and 0%. The smaller the number, the fewer the remaining
toner.
Paper remaining in the Multi Purpose Tray is indicated either by 100% or
0%.
OPERATION GUIDE