Table of Contents
Advertisement
Important Safety
Instructions
(continued)
Avoid fire hazard or
electrical
shock. Do not
use an
adaptor plug or extension cord or
remove
grounding
prong
from
electrical
power
cord. Failure to
follow
this warning
can cause
serious injury, fire or death.
Grounding type
wall receptacle
Do not under
any circumstances
1
cut, remove,
_or
bypass
/
_
the grounding prong I
I__
thisplug"
_}
I
P°wer _ PP
Y_II_
V
cord with 3-prong
grounding plug
CORRECT
Use this way ONLY
Do not
use or mix
liquid chlorine bleach with other
household chemicals such as toilet
cleaners,
rust removers,
acid or
products
containing
ammonia.
These
mixtures
can
produce
dangerous fumes which can cause
serious injury or death.
Prevent
Injury
TOprevent shock hazard and assure stability during operation, the
washer must be installed and electrically grounded by a qualified service person in
accordance with local codes. Installation instructions are packed in the washer for
installer's reference. Refer to INSTALLATIONINSTRUCTIONS for detailed grounding
procedures. If the washer is moved to a new location, have it checked and
reinstalled by a qualified service person.
To prevent personal injury or damage to the washer, the electrical
power cord of the washer must be plugged into a properly grounded and polarized
3-prong outlet. The third grounding prong must never be removed, Never
ground the washer to a gas pipe, Do not use an extension
cord or an
adaptor
plug.
Follow package directionswhen using laundry products. Incorrect
usage can produce poisonous gas--resulting in serious injury or death.
•
Do not combine laundry products for use in 1 load unless specified on the
label.
•
Do not mix chlorine bleach with ammonia or acids such as vinegar.
To prevent serious personal injury and damage to the washer:
•
All repairs and servicing must be performed by an authorized servicer
unless specifically recommended in this Owner's Guide. Use only authorized
factory parts.
•
Do not tamper with controls.
•
Do not install or store the washer where it will be exposed to the weather.
To reduce the risk of electric shock, disconnect this appliance from
the power supply before attempting any user maintenance. Turning the controls
to the OFF position does not disconnect this appliance from the power supply.
To prevent injury, do not reach into the washer while parts are
moving. Before loading, unloading or adding items, push in the cycle selector knob
and allow the drum to coast to a complete stop before reaching inside.
[]
Failure to comply with these warnings could result in serious personal injuries.
[]
This washer is equipped with an electrical overload protector. The motor will
stop if it becomes overheated. The washer will automatically restart after a cool
down period of up to 30 minutes, if the washer has not been manually turned off
during this time.
SAVE THESE INSTRUCTIONS
Note: The instructions appearing in
this Owner's Guide are not meant to
cover every possible condition
and
situation that may occur. Common
sense and caution must be practiced
when
installing,
operating
and
maintaining any appliance.
Advertisement
Table of Contents
