Download Print this page

Frigidaire GLER341CES0 Owner's Manual page 6

Hide thumbs Also See for GLER341CES0:

Advertisement

Care and Cleaning
/
z
J
J
J
J
J
Clean lint screen after every Ioad_
Do not store or place laundry
products
on
top of dryer at any time
They can damage
the finish
or controls_
_To
reduce risk of fire or serious injury to persons or property, comply
with the basic warnings listed in Important
Safety Instrucdons,
pages 2-3, and
those listed below.
Before cleaning the dryer interior, unplug the etectrical power cord to avoid
electrical shock hazards.
Do not use any type spray cleanser when cleaning dryer interior. Hazardous
fumes or electrical shock could occur.
Inside
Clean the lint screen after every load. Lint build4@ in the screen restricts air flow,
which causes longer drying times. The screen islocated atthe bottom of the door
opening. Remove by pulling straight up. Removethe lint and replace tile screen.
Occasionally a waxy build-up may form on the lint screen from using dryer-added
fabric softener sheets. To remove this build-up, wash the lint screen in warm,
soapy water. Dry thoroughly and replace. Do not operate the dryer without the
lint screen in place.
Ifthe dryer drum becomes stained from noncolorfast fabrics, clean the drum with
a damp cloth and a mild liquid household cleanser. Remove cleanser residue
before drying the next load.
Every 18 months an authorized servicer should clean the dryer cabinet interior
and exhaust duct. These areas can collect lint and dust over time. An excessive
amount of lint build-up could result in inefficient drying and possible fire hazard.
Outside
Clean the cabinet with mild soap and water. Never use harsh, gritty
or
abrasive c/eansers.
If the cabinet becomes stained, clean with diluted chlorine bleach [I/2 cup
(120 ml) in 1 quart (.g5 liter) water]. Rinse several times with clear water.
Remove glue residue from tape or labels with a mixture of warm water and mild
detergent. Or, touch residue with the sticky side of tile tape or label.
Before moving the dryer, place a strip of cardboard or thin fiberboard under
the front leveling legs to prevent damage to floor.

Advertisement

loading

This manual is also suitable for:

Bef332ces0