Table of Contents
Advertisement
Operating
Instructions
(continued)
TO CHANGE TEMPERATURE
DISPLAY:
temp/timer
A
V
DO THIS:
.
PRESS AND HOLD THE
UP/DOWN BUTTONS
TOGETHER FOR 3 SECONDS
YOU WILL SEE;
temp/timer
A
V
Note: The control is capable of displaying temperature
in degrees Fahrenheit or degrees Celsius.
TO TURN
UNIT OFF:
temp/timer
A
V
auto
-,hi
med
®
DO THIS:
PRESS
ON/OFF BUTTON
YOU WILL SEE;
temp/timer
A
m
v
auto
hi
med
lo
ADDITIONAL
THINGS
YOU
SHOULD
KNOW
o
Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with.
,,The "Cool"
circuit
has an automatic
3 minute
time
delayed
start
if the unit is turned
off and on quickly.
This prevents
overheating
of the compressor
and possible circuit
breaker
tripping.
The fan will continue
to run during
this time.
• There is a 2-Second delay for the compressor shutting down when selecting FAN ONLY. This is to cover the possibility of having
to roll through to select another mode.
• The control will maintain the set temperature
within 1 degrees Celsius, between 16 °C and 32 °C.
• After a power outage, the unit will memorize the last setting and return the unit to the same setting once power is restored.
EXHAUSTCONTROL
cool m
energy saver
fan only
closed
exhaust:
open
temp/timer
A
V
auto
=,hi
reed
lo
o
This Exhaust Control allows the air conditioner to either recirculate inside air (CLOSED) or exhaust air to the outside (OPEN).
The CLOSED position is used when maximum cooling is desired. It may also be used for air recirculation without cooling when the
air conditioner is set in any FAN position.
The OPEN position removes stale air from the room and exhausts it to the outside. Fresh air is drawn in through normal passages
in the home.
@2009 Electrolux Home Products, Inc.
All rights reserved.
Advertisement
Table of Contents
