Operation; Product View And Parts Identification; Selecting An Extension Cord; Attaching The Extension Cord To The Trimmer - Craftsman WEEDWACKER 358.745121 Instruction Manual

KNOW YOUR TRIMMER
READTHIS INSTRUCTIONMANUALAND SAFETY RULES BEFOREOPERATING YOUR
UNIT.Compare the illustrations with your unit to familiarize yourseff with the location of
the various controls and adjustments. Save this manual for future reference.
Cord
Retainer Assist Handle
Recessed
Piug
Motor Housing
RECESSED PLUG
The RECESSED PLUG is where you at-
tach your extension cord to the unit.
TRIGGER SWITCH
The TRIGGER SWITCH is used to turn
on the unit. Squeeze the trigger switch
to operate the unit. Release to stop.
LINE LIMITER BLADE
The LINE LIMITER BLADE cuts the cut-
ting line to the proper cutting length.
ead
with 0.065 in.
Trimmer Line
Tap Button
Line Limiter Blade
ASSIST HANDLE
The ASSIST HANDLE is used to help
hold and guide the unit.
TRIMMER HEAD
The TRIMMER HEAD holds cutting line
and rotates during operation.
TAP BUTTON
The TAP BUTTON is used to advance
the cutting line during operation and to
remove the spool during line replace-
ment.
OPERATING INSTRUCTIONS
Use only a voltage supply as specified
on your unit.
SELECT AN EXTENSION CORD
Extension Cord Gauge Chart
Length of Cord Gauge
25 Ft. (7.5 m) 18 Gauge
50 Ft. (15 m) 16 Gauge
100 Ft. (30 m) 16 Gauge
Extension cords are available for this
unit at Sears.
Extension Cord
(16 Guage) ............ 71-85708
ATTACH THE EXTENSION
CORD TO YOUR TRIMMER
Loop your extension cord through the
handle and around the hook as
shown. Insure the plug and cord are
firmly and fully engaged.
Cord Retainer
6