Advertisement
Read these instructions andthismanual in
itsentirety before y ouattempt toassemble
oroperate y ournewlawn mower.
IMPORTANT:
This lawn mower isshipped
WITHOUT OILORGASOLINE
inthe
engine.
Your new lawn mower has been as-
sembled at the factory with the exception
of those parts left unassembled for
shipping purposes. All parts such as nuts,
washers, bolts, etc., necessary to complete
the assembly have been placed in the
parts bag. To ensure safe and proper
operation of your lawn mower, all parts
and hardware you assemble must be
tightened securely. Use the correct tools as
necessary to ensure proper tightness.
TO REMOVE
LAWN MOWER
FROM
CARTON
1. Remove loose parts included with
mower.
2. Cut clown two end comers of carton
and lay end panel down flat.
3. Remove all packing materials except
padding between upper and lower
handle and padding holding operator
presence control bar to upper handle.
4. Roll lawn mower out of carton and
check carton thorougly for additional
loose parts.
HOWTO
SET UPYOUR
LAWN
MOWER
TO UNFOLD HANDLE
IMPORTANT:
Unfold handle carefully so
as not to pinch or damage control cables,
1, Raise handles until lower handle
section locks into place in mowing
position.
2. Remove protective padding, raise
upper handle section into place on
lower handle and tighten both handle
knobs,
3. Remove handle padding holding
operator presence control bar to upper
handle.
Your lawn mower handle can be adjusted
for your mowing comfort. Refer to "Adjust
Handle' in the Service and Adjustments
section of this manual.
Operator presence
control bar
Upper
Lift Ul
Mowing position
Lower handle
TO INSTALL
ATTACHMENTS
Your lawn mower was shipped ready to
be used as a mulcher. To convert to
bagging or discharging, sea 'q'o convert
mower" in the OPERATION section of this
manual.
Advertisement
