Advertisement
TROUBLESHOOTING
CHART
PROBLEM
CAUSE
CORRECTION
;rasscatcher
1. Cutting h eight toolow.
1.'Raise cutting height.
iotfilling(ifso
2. Lift on blade worn off,
2, Replace blade.
;quipped)
3, Catcher not venting air.
3, Clean grass catcher.
tardto push
1, Raise cutting height,
1. Grass is too high or wheel
height is too low.
2. Rear of lawn mower
housing or blade dragging
in grass.
3. Grass catcher too full.
4. Handle height position not
right for you.
2. Raise 'rear of lawn mower
housing one (1) setting
higher.
3. Empty grass catcher,
4. Adjust handle height to
suit.
17
Advertisement
