Electrolux Wave-Touch CEW30GF6GWD Use & Care Manual page 60

°0ii t,oos to c om i Prob'em
Oven smokes excessively during • Control not set properly. Follow broiling instructions under
broiling Setting Oven Controls.
Make sure oven door is closed when broiling.
Meat too close to the broil burner. Reposition the broil
rack to provide proper clearance between the meat & the
, element. Preheat the broil burner for searing.
Meat not properly prepared. Remove excess fat from
meat. Cut remaining fatty edges to prevent curling, but
° do not cut into lean.
Insert on broiler pan wrong side up & grease not draining.
Always place grid on the broiler pan with ribs up & slots
, down to allow grease to drip into pan (some models).
Grease has built up on oven surfaces. Regular cleaning is
necessary when broiling frequently. Old grease or food
spatters cause excessive smoking.
Flames inside oven or • Excessive spillovers in oven For example this will
smoking from oven vent happen for pie spillovers or large amounts of grease left
on the oven bot[om. WiDe up excessive spillovers before
starting oven If flames or excessive smoke are present
see "About broiling" in the Setting Oven Controls
section.
Oven control panel beeps &
displays any F code error (for
example FIO, F11, F13, F14,
F15, F20, F23, F25, F30, F31
or F90)
Oven control has detected a fault or error condition.
Press CANCEL to clear the display & stop beeping.
Try the bake or broil feature again. If the F code error
repeats, remove power supply to appliance, wait 5
minutes and then repower the appliance and set clock
for the time of day. Try the bake or broil feature again.
If the fault recurs, record fault and call for service.