Craftsman 917.254740 Owner's Manual page 20

TENANCE
(_ WHEEL
LUBRICATION
SPINDLE
{_ MOWER CLUTCH
(D SAE MOTOR OIL- 30W
@ EXTREME PRESSURE
LUBRICATING GREASE
@ REFER TO ENGINE OIL
SPECS (PAGE 16)
(_ SAE MOTOR OIL 10W30
API- SFiCC
PUMP @
REPAIR &
NEGATIVE
{BLACK CABLE
TERMINAL
POSITIVE
tRED CABLE/
TERMINAL
FIGURE 30
ADJUSTME
_ATTE RY
NT
FOR ANY ADJUSTMENTS, INSPECTION
OR MAINTENANCE:
1. PUSH TRACTOR CLUTCH/BRAKE
PEDAL COMPLETELY INTO BRAKE
POSITION.
2. MOVE MOTION CONTROL LEVER TO
"NEUTRAL" POSITION.
3. PLACE PARKING BRAKE IN
"ENGAGED" POSITION. REMOVE
FOOT FROM PEDAL.
4. PLACE ATTACHMENT CLUTCH
SWITCH 1N "DISENGAGED"
POSITION.
5. TURN IGNiTiON KEY TO "OFF"
POSITION.
6. MAKE ABSOLUTELY SURE THE
BLADES AND ALL MOVING PARTS
HAVE COMPLETELY STOPPED.
7. REMOVE THE IGNITION KEY.
8. DISCONNECT THE SPARK PLUG
WIRES FROM THE SPARK PLUG
AND KEEP WIRE AWAY FROM THE
PLUG TO PREVENT INJURY FROM
ACCIDENTAL STARTING. BE CAREFUL
TO AVOID TOUCHING HOT ENGINE OR
MUFFLER COMPONENTS.
2O