Advertisement
Available languages
Available languages
OTHER SAFETY CONSIDERATIONS
•
The pressure equipment is designed to be used
with Sears authorized parts ONLY. If you use this
equipment with parts that DO NOT comply with
minimum specifications, the user assumes all risks
and liabilities.
•
Before starting the pressure washer in cold
weather, check all parts of the equipment and be
sure ice has not formed there.
•
NEVER use a spray gun which does not have a
trigger lock or trigger guard in place and in working
order.
•
Keep the hose connected to machine or the spray
gun while the system is pressurized. Disconnecting
the hose while the unit is pressurized is dangerous.
•
NEVER operate units with broken or missing parts,
or without protective housing or covers.
•
Check the fuel system for leaks or signs of
deterioration, such as chafed or spongy hose,
loose or missing clamps, or damaged tank or cap.
Correct all defects before operating the pressure
washer.
•
NEVER move the machine by pulling on the high
pressure hose. Use the handle provided on the
unit.
•
Always be certain the spray gun, nozzles and
accessories are correctly attached.
•
DO NOT secure the spray gun in the open position.
•
Hold the spray gun firmly in your hand before you
start the unit. Failure to do so could result in an
injury from a whipping spray gun. DO NOT leave
the spray gun unattended while the machine is
running.
•
DO NOT by-pass any safety device on this
machine.
Advertisement
