Table of Contents
Advertisement
ORBITAL
MOTION
Orbital motion is ideal for fast cutting action when
removing old finishes, smoothing rough wood, cutting
stock down to required dimensions, or for finishing
surfaces to be painted. As shown in figure 6, the
sandpaper moves in tiny circles at a very high speed,
allowing the sander to move easily.
Fig. 6
DUSTLESS
SANDING
The dust bag located on the rear of your sander
provides a dust collection system for your sander.
Sanding dust is drawn up through the holes of the
cushion and collects in the dust bag during sanding
operation. For more efficient operation, empty dust
bag when half full.
TO EMPTY
DUST BAG
•
Unplug your sander.
_.
WARNING:
Failure to unplug your sander could
result in accidental starting causing possible
serious personal injury.
•
Unzip dust bag.
•
Shake dust bag to empty.
•
Zip dust bag up after emptying.
TO REMOVE DUST BAG FOR EMPTYING OR
CLEANING
See Figure7.
• Unplug your sander.
,_
WARNING:
Failure to unplug your sander could
result in accidental starting causing possible
serious personal injury.
DUST BAG
TO REMOVE
DUSTBAG
Fig. 7
•
Slide dust bag retainer from sander as shown by
the arrow in figure 7. Note: Grooves on dust bag
retainer align with grooves on your sander.
•
Empty dust bag.
TO INSTALL
DUST BAG
See Figure 8.
•
Unplug your sander.
,_,
WARNING:
Failure to unplug your sander could
result in accidental starting causing possible
serious personal injury.
DUSTBAG
\
DUSTBAG
RETAINERGROOVES
GROOVES
ON SANDER
Fig. 8
•
Realign grooves
on dust bag retainer with
grooves on your sander.
•
Slide dust bag assembly into place as shown by
the arrow in figure 8.
9
Advertisement
Table of Contents
