Craftsman 358.351910 Operator's Manual page 7

dosoisaviolation ofthe law. R efer to
the Customer Responsibilities chart in
theMAINTENANCE section.
STANDARDS: This chain s aw islisted
byUnderwriters Laboratories, Inc. i nac-
cordance with American National Stan-
dards for G asoline-Powered Chain
Saws Safety Requirements (ANSI
B175.1-2000).
ltlWARNING:Before using c hain
saw, ensure all f asteners are secure.
CARTON CONTENTS
Check carton contents against the fol-
lowing list.
Model 358,351910
• Chain saw (fully assembled)
• Chain adjustment tool (bar tool)
• 2-cycle engine oil
• Carrying case
• Extra chain
Examine parts for damage. Do not use
damaged parts.
If you need assistance or find that parts
are missing or damaged, please call
1-800-235-5878.
NOTE: It is normal to hear the fuel filter
rattle in an empty fuel tank.
Your unit has been factory tested and
the carburetor precisely adjusted. As a
result you may smell gasoline or find a
drop of oil/fuel residue on the muffler
when you unpack the unit.
ASSEMBLY
Your saw is fully assembled; no
assembly is necessary.
KNOW YOUR CHAIN SAW
READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with the
location of the various controls and adjustments. Save this manual for future ref-
erence.
Front Hand Guard Front Handle
Starter Rope
/
ON/STOP
Switch Choke/
Fast Idle
Chain Muffler
Lever
/ "
Bar
Sprocket
Hole
Throttle
Lockout
Rear
Handle
Throttle Trigger
Bar Oil Fill Cap
/
Starter Housing Fuel Mix Fill Cap
Cylinder Cover
\_ Chain
Brake
/ Chain
Clutch Cover Knob Catcher
Primer Bulb
Chain
Direction
of Travel
Guide Bar