Table of Contents
Advertisement
TO ATTACH GRASS CATCHER
1. Lift the rear door of the lawn mower
and place the grass catcher frame side
hooks onto the door pivot pins.
2. The grass catcher is secured to the lawn
mower housing when the rear door is
lowered onto the grass catcher frame.
AI::_CAUTION: Do not run your lawn mower
without mulcher plug, clipping deflector or
approved grass catcher in place. Never at-
tempt to operate the lawn mower with the
rear door removed or propped open.
Pivot
Rear
door
Grass
catcher
handle
Catcher frame hook
TO EMPTY GRASS CATCHER
1. Lift up on grass catcher using the
frame handle.
2. Remove grass catcher with clippings
from under lawn mower handle.
3. Empty clippings from bag.
NOTE:
Do not drag the bag when emp-
tying;
it will cause unnecessary
wear.
Grass
catcher
frame
handle
TO CONVERT
MOWER
Your lawn mower was shipped ready to be
used as a mulcher.
To convert to bagging
or discharging:
REAR BAGGING
• Open rear door and remove mulcher
plug. Store mulcher plug in a safe
place.
• You can now install the grass catcher or
optional clipping deflector.
• To convert to mulching or discharging
operation,
install mulcher plug into rear
discharge
opening of mower.
Mulcher plug
SIDE
DISCHARGING
• Mulcher plug must be installed into rear
discharge opening of mower.
• Open mulcher door and install dis-
charge deflector under door as shown.
• Mower is now ready for discharging
operation.
• To convert to mulching or bagging
operation,
discharge deflector must be
removed and mulcher door closed.
/
Open mulcher door
Install
discharge
deflector
\
MOWER IS NOW READY FOR
DISCHARGING
OPERATION
10
Advertisement
Table of Contents
