Lenovo ThinkPad T430u Hardware Maintenance Manual page 89

• "1030 Hard disk drive or solid-state drive assembly" on page 61
• "1040 Keyboard" on page 63
• "1050 Memory module" on page 66
• "1060 PCI Express Mini Card for wireless LAN" on page 67
• "1070 PCI Express Mini Card for wireless WAN or mSATA solid-state drive" on page 68
• "1080 Backup battery" on page 71
• "1090 Keyboard bezel" on page 72
• "2010 LCD unit" on page 84
• "1160 System board assembly and thermal fan assembly" on page 79
Removal steps of DC-in sub card
Step Screw (quantity)
2
M2 × 2.5 mm, wafer-head, nylon-coated (1)
Applying labels to the base cover assembly
The new base cover FRU is shipped with a kit containing labels of several kinds. Apply those labels listed
when you replace the base cover. For the labels which are not shipped with the new base cover, peel them
off from the old base cover, and adhere them to the new one.
Notes:
• If the Windows Certificate of Authentication (COA) label is attached to a part that is replaced, return the
old part with the label attached to the customer, or provide a letter to the customer stating what the label
was originally on the computer and what the label part number, serial number, and product key were.
• If there are two FCC labels on the base cover, apply both to the new base cover.
The following illustration shows the location of each label.
Torque
Color
Silver 0.181 Nm
(1.85 kgf-cm)
.
Chapter 9 Removing or replacing a FRU
83