Oki ES2426dn Reference page 27

Proof and Print
• The internal hard disk must be installed in the printer and
enabled, to allow for spooling of the print job before final
printing.
• If the hard disk memory is insufficient for the spooled
data,
DISK FULL
• If the software application being used has a collate print
option, it must be turned OFF for proof and print to
operate correctly.
• Proof and print may not be available in some software
applications.
Using Proof and Print
1. Select Proof and
2. Enter a job name of up to 16 characters under
Setting
9999.
3. Click Print
from the software application being used. The document will
be stored on the printer's hard disk and one copy will print for
your perusal.
4. After checking the proof, you then can print or delete (if
incorrect) the remaining copies of the document using the
procedures given below.
Printing the copies of a Proof and Print document
1. Press the MENU button to access the
press the SELECT button.
2. Use the numbered buttons on the control panel to enter the
personal ID number you set above.
3. Press the VALUE button until
name is displayed.
4. Press the SELECT button to print the remaining copies of the
document.
NOTES
is displayed and only one copy is printed.
Print.
and a four digit personal ID number from 0000 to
to proceed with your print job. Print the document
PRINT JOBS MENU
or the required job
ALL JOBS
27
Job Name
, then