Chapter 6. Special Keys - Lenovo ThinkPad Edge E435 Hardware Maintenance Manual
Hardware maintenance manual
Hide thumbs
Also See for ThinkPad Edge E435:
- Guia do usuário (180 pages) ,
- Podręcznik użytkownika (180 pages) ,
- Guía del usuario (180 pages)
Table of Contents
Advertisement
Chapter 6. Special keys
The computer comes with several special keys at the upper row of the keyboard. To use each function,
directly press the desired key.
The following table explains the function of each special key.
Table 6. Special keys
Special key
Description
If you mute the sound and then turn off the computer, the sound will remain muted when you
Speaker mute (F1)
turn on the computer again. To turn on the sound, press the speaker volume up or speaker
volume down key.
Speaker volume
down (F2)
Speaker volume up
(F3)
Microphone mute
Press the microphone mute key to mute or unmute all of the recording devices.
(F4)
Launch the
If you press F5, the camera and audio settings window will open and the camera preview is
communications
turned on. From this window, you can change the camera and audio settings.
settings utility (F5)
Switching the display
Press this key to switch between the computer display and an external monitor. The following
output location (F6)
options will be displayed:
• Computer display only (LCD)
• Computer display and external monitor (same image)
• Computer display and external monitor (the Extend desktop function)
• External monitor only
Note: You also can use the Windows+P combination to switch between the computer display
and an external monitor.
Display brightness
When you press this key, the computer display becomes dimmer. The purpose of this method
down (F7)
is to change the brightness level temporarily. To change the default brightness level, use the
Power Manager program, or go into Control Panel ➙ Performance and Maintenance ➙
Power Options and make changes as desired.
Display brightness up
When you press this key, the computer display becomes brighter. The purpose of this method
(F8)
is to change the brightness level temporarily. To change the default brightness level, use the
Power Manager program, or go into Control Panel ➙ Performance and Maintenance ➙
Power Options and make changes as desired.
© Copyright Lenovo 2012
43
Advertisement
Table of Contents
