HP XP1024 System Configuration Manual page 31

OFC
x
OPEN-
OS
PA
path
port
RAID
remote console PC
Remote Control
(RC)
Remote Web Con-
sole (RWC)
R-SIM
SCSI
SIM
SNMP
SVP
TB
TID
HP StorageWorks Disk Array XP operating system configuration guide NonStop
is available when the HP StorageWorks LUN Configuration
Manager product is installed.
Open Fibre Control.
A general term describing any one of the supported OPEN
emulation modes (for example, OPEN-L).
Operating system.
Physical address.
"Path" and "LUN" are synonymous. Paths are created by
associating a port, a target, and a LUN ID with one or more
LDEVs.
A physical connection that allows data to pass between a
host and the disk array. The number of ports on an XP disk
array depends on the number of supported I/O slots and the
number of ports available per I/O adapter. The XP family of
disk arrays supports Fibre Channel (FC) ports as well as other
port types. Ports are named by port group and port letter, such
as CL1-A. CL1 is the group, and A is the port letter.
Redundant array of independent disks.
The PC running HP StorageWorks Remote Control XP.
HP StorageWorks Remote Control XP. A software product used
for managing XP arrays.
HP StorageWorks XP Remote Web Console. A browser-based
program installed on the SVP that allows you to configure and
manage the disk array.
Remote service information message.
Small computer system interface.
Service information message.
Simple Network Management Protocol.
Service processor, which is the PC built into the disk controller.
The SVP provides a direct interface into the disk array. SVP use
is reserved for HP support representatives only.
Terabyte.
Target ID.
31