Ericsson T18d User Manual page 38

Placing a Calling Card Call
1 Enter or recall the phone number you want to call.
2 Press and hold
YES
the active calling card are shown in the display.
3 Release the key after the number has been displayed.
4 If you are using stops between numbers, you must
press or any number key to send the next
YES
sequence of numbers. If you use pauses, the num-
bers are sent automatically after the specified length
of time chosen in the Domestic or International
calling pattern.
Default Card
The
calling card as your default calling card. To select which
calling card is your default calling card, do the following:
1 Press or from the Standby screen to access the
Ñ Ô
main menu.
2 Press when the
YES
lighted.
3 Press or until
Ñ Ô
4 Press to open the
YES
5 Press or until
Ñ Ô
highlighted (the current selection will be indicated
by a filled radio button).
34
. The calling card number and
submenu allows you to assign one
menu is high-
is highlighted.
submenu.
or is
6 Press to select the card you want to use.
YES
Phone Number
The
mobile phone number(s) that are programmed into your
phone.
The currently active phone number will be selected
when you enter the
a different phone number, press
ber you want to select is highlighted. Press
the phone number.
Note! Contact your service provider to determine if your
phone supports multiple phone numbers/subscriptions.
The ability to add a second subscription is an optional
feature that may be allowed by your service provider. If
available, this offers you the option of adding a second
telephone number to your mobile phone so that it will
be more useful in areas to which you frequently roam.
Your second subscription may be obtained from your
current mobile service provider or from a second service
provider. It is particularly useful where international
roaming is not yet available. If you have multiple sub-
scriptions, you may switch phone numbers by doing the
following:
1 Press or from the Standby screen to access the
Ñ Ô
main menu.
2 Press when the
YES
lighted.
3 Press or until
Ñ Ô
submenu is used to display the
submenu. To select
or until the num-
Ñ Ô
to select
YES
menu is high-
is highlighted.
Menu Descriptions