Turning Your Phone On And Off; Making And Receiving Calls - Ericsson A1228c User Manual

Ericsson mobile phone user guide a1228c
Hide thumbs Also See for A1228c:
Table of Contents

Advertisement

charging the battery. When your phone is fully charged, the plug
icon will remain stable.
Note! You cannot make or receive calls when your phone is in charge-only
mode.
Slow Charging a Deeply Discharged Battery
The battery could become deeply discharged (for example, when the
battery is stored for a long period). As a result, the phone may not
immediately activate charge-only mode when the charger is con-
nected.
Ã
Attach the charger to the phone for several hours to slowly charge
(trickle charge) the battery.
After trickle charging the battery for several hours the phone
should activate the charge-only mode automatically.
Continue charging the phone until the battery is fully charged.

Turning Your Phone On and Off

Turn your phone On by pressing and holding
turns on. The phone will beep (unless silent mode is activated). Turn
your phone Off by pressing and holding
off. You must return to Standby mode to turn off your phone.

Making and Receiving Calls

See "Voice Calls" on page 17 for more information about making
and receiving calls.
6
until your phone
N O
until your phone turns
N O
Making Calls
Ã
Press the numeric keys to enter the phone number you want to
call. The number is shown in the display.
Note! You can press
to erase one or more digits in the display, or
B A CK
press and hold
to erase all digits.
B A CK
8hyyvt
Press
.
, along with the number you are dialing, is
Y E S
shown in the display while your phone accesses the wireless net-
work.
When the call is connected, a call timer is shown in your display.
The phone number that you dialed will remain on your screen.
To end the call, press
Receiving Calls
When your phone receives a call, the ringer sounds,
appears in the display, and the display and keypad backlight illumi-
nate. You can temporarily silence the ringer by pressing
upper or lower side keys, and still answer the call by pressing
you have Caller Number Identification (Caller ID) service from your
service provider, the caller's phone number is shown in the display.
The caller's name will also appear if the phone number is found in
your phonebook.
Answer the phone by pressing any key. For information on adjusting
your answering preferences, see "Auto Answer" on page 13.
vtÃ8hyy
is replaced by the call timer display once the call is
answered. End the call by pressing
.
N O
Dp‚€vtÃ8hyy
N O
.
N O
Getting Started
or the
. If
Y E S
Dp‚€

Advertisement

Table of Contents
loading

Table of Contents