Approved Memory Cards - Nikon D5000 User Manual

Remote
controls
ML-L3wirelessremotecontrol (_ 67): Use as a remote shutter release for self-portraits
or to prevent blur caused by camera shake. The ML-L3 uses a 3 V CR2025 battery.
®
Pressing the battery-chamber latch to the right (_1_), i nsert a fingernail into the gap
and open the battery chamber (_2_).Ensure that the battery is inserted in the
correct orientation (_4_).
The D5000 is equipped with an accessory terminal for
MC-DC2 remote cords (_ 86) and GP-1 GPS units
Accessory (_ 114), which connect with the • mark on the
terminal connector aligned with the • mark next to the
accessories accessory terminal as shown at right (to access the
accessory terminal, open the connector cover; close the
cover when the terminal is not in use).
Approved Memory Cards
The following SD memory cards have been tested and approved for use in the DSO00.
All cards of the designated make and capacity can be used, regardless of speed.
* If card will be used with card reader or other device, check that the device supports 2GB cards.
$ SDHC compliant. If card will be used with card reader or other device, check that the device _p
supports SDHC.
Other cards have not been tested. For more details on the above cards, please
contact the manufacturer.
203