Table of Contents
Advertisement
o
3
"o
e
o_
g
Use the USB cable and PictureProject
software
supplied with your camera to
copy (transfer)
pictures to a computer.
Before Connecting
the Camera
Installing
PictureProject
Before transferring
pictures or movies to a computer,
PictureProject
must be
installed.
For more information
on installing and using PictureProject,
see the
Quick Start Guide.
Confirming
USB Option
The following
two methods can be used to transfer pictures from the camera
to a computer:
• Press _r_ (_)) on the camera.
° Click [Transfer] in PictureProject.
The method
used will depend on your computer's
operating
system and the
USB option selected in the camera's setup menu.
Operating
system
USB option I
Win Jows XP Home Edition
Windows
XP Professional
Choose
[Mass storage]
or [PTP].
Choose
[Mass storage].
Mac OS X ( 10.3.9 or later
Choose [PTP].
Choose [Mass storage]
or [PTP].
i This camera supports the USB mass storage device class (default setting [Mass storage]) and
Picture Transfer Protocol ([PTP]) USB transfer protocols.
2 The camera's _
(_)) button
cannot be used to transfer pictures in the following
cases.
Use [Transfer] in PictureProject.
• When transferring
pictures from the camera's internal
memory and [Mass storage]
is
selected in the [USB] menu.
• When the memory card write-protect
switch is in the "lock"
position. Unlock by sliding
the switch to the "write"
position before transferring
pictures.
J
If your computer is running Windows 2000 Professional, be sure to set the USB option to
[Mass storage]. If [PTP] is selected, the Found New Hardware Wizard will be displayed when
the camera is connected to the computer.
Select [Cancel], close the window,
and discon-
nect the camera from the computer.
62
Advertisement
Table of Contents
