Nikon COOLPIX S6000 User Manual page 45

3 Press i_.
The travel destination screen is displayed.
4 Press _ or i_ to choose the travel destination
time zone.
If daylight saving time is in effect, press • to enable
daylight saving time function. % is displayed at the top
of the monitor and the camera dock is advanced one
hour. Press • to disable the daylight saving time
function.
Press the _) button to apply the travel destination time
zone.
While the travel destination time zone is
selected,the _
icon will be displayed in the monitor when the camera is
in shooting mode.
_1_ Note on the Clock Battery
The camera clock is powered by the clock battery. The clock battery charges when the main battery
is inserted or an AC adapter is connected, and can provide several days of backup power after about
ten hours of charging.
[] _ Home Time Zone
• To switch to the home time zone, choose 1_" Home time zone in step 2 and press the _) button.
• To change the home time zone, choose "_" Home time zone in step 2, and complete steps 3 and
4.
[] Daylight Saving Time
When daylight saving time starts or ends, turn the daylight saving time _nction on or off from the
time zone selection screen displayed in step 4.
[] Imprinting Date on Pictures
Enable date imprint from the Date imprint option (_ 128) in the setup menu after the date and
time have been set. When the Date imprint option is enabled, pictures will be recorded with
shooting date imprinted on them.
F,"
125