Advertisement
VCR can't be remote controlled...
You can't view programs normally on TV...
Video cassettecan't be inserted...
Video cassettecan't be removed...
Video cassetteejectswhen the REC and PLAY buttonsare
pressedor when the POWER buttonis pressedoff to set
the Timer...
In the stop mode, the motor(CYLINDER) continuesto
rotate...
• Aim the Remote Control directly at the remote sensor on
the VCR. (Refer to Control Reference Guide)
• Avoid all obstacles which may interfere with the signal
path.
• Inspect or replace the batteries (P.2).
• Set the VCR/-FV selector to "TV". (P.8)
• Insert the cassette with the window side up and the record
tab facing you.
• Check that the power plug is completely connected to an
AC outlet.
• Make sure the record tab on the back of the cassette is
still intact. (P. 16)
• To enable the quick play mechanism, the cylinder will
rotate for about 10 minutes.
• The quick play mechanism reduces response time from
stop to PLAY mode from PLAY to REWIND search mode.
21
Advertisement
