Advertisement
Connections
you'll
need to make.
(Choose front or rear
connection.)
Playing (Source)
VCR
Front View
for front audio/video
inputconnection
I _l I
It
1
I_l_ll
(-_
Oul
Recording
(Editing) VCR
fideo
TV for Monitoring
CH3 or 4
In
Insert a pre-recorded
tape
into the Playing (Source) VCR.
Then, insert a blank tape
with record tab into the Recording
(Editing) VCR.
Select "LINE"
as the input on the Recording VCR.
LINE1" For rear audio/video connection.
LINE2: For front audio/video connection.
• See page 8 for LINE inputinformation.
Press PLAY
on the Playing VCR.
Then, press PAUSE/STILL
when the tape reaches the point you want to
start copying.
Press REC and PLAY
at the same tim_ on the Recording VCR.
Then, press PAUSE/STILL
immediately.
5
Press PAUSE/STILL
on both VCRs to begin coDyil'Ig,
Then, press STOP
on both VCRs to stop CO DVing.
To Monitor
the Re-Recording
Turn the TV on and select its
VCR channel
(either channel 3 or 4).
Then, set the VCRFFV selector
on the Recording VCR to the "VCR" position.
Caution:
Unauthorized exchanging and/or copying of
copyrighted recordings may be copyright
infringement.
Helpful
Note
• By using the PAUSE/STILL button (on the
Recordingunit)whilecopyingis in progress, you can
edit out unwantedpartsof the originalrecording.
9
Advertisement
