Panasonic TH-42PD60X Operating Instructions Manual page 25

Automatically searches and adds receivable channels to memory.
_i_Select "ANT In" ,@(Select Cable or Antenna
@_Select "Mode" _SelectAII orAnalog
All: Analog and digital
Analog: Analog only
_3_Select "Start scan"
Start scan
:)start
_select
Settings are made
automatically
@After completing the setting,
select "Apply". (see below _4_).
@All previous memorized
channels are erased.
Use this procedure when changing setting of recewing channels or changing the channel display.
Also, use to add or delete channels from channel list manually.
(_Select "Edit"
_2_Select the item to be edited
F %_l_select_, item to edit
_'_ -J (Caption/Favorite/
P-ff-_ Add'_
,
=,29 next
Caption Add
@Caption:
Changes the station identifier
@Favorite:
Registers channel to Favorites List
@Add:
Adds or deletes channels
_Edit
@Caption
[ Preset ]
Select the station identifier
[ Caption detail ]
Rename (maximum 7 characters available)
@Favorite
[ Favorite ]
Select the number
@Add
@Press "OK" button to select "Yes (add)" or "No
(delete)"
f-_o. ,\
@Select "Apply" RE'tURN _:_ok
_ _ _ _ (to enter
Press to move cursor to \ ) t,..2_, / your
"Apply" _ program)
Check the signal strength if interference is found or freezing occurs on a digital image.
nal intensity
@If the signal is weak, check the antenna.
If no problem is found, consult your
local dealer.
Note
@Not available if "Cable" is selected in "ANT In"
(see above).
FR
(.Q
93
03
(1)
©
::3"
93
CO
@If "Channel lock" (p. 22) is activated and "Auto", "Manual" or "Signal meter" is selected, "Enter password." will be
displayed.
25