Advertisement
Playing older or damaged tapes may eventually
cause video heads to become clogged.
Video Head Clog Sensor
During playback this
r
screen appears if
L
cloggingis detected.
NEEDVIDEO
CLEANING
HEADS
MAy
To remove screen,
PLEASE I NSERT H EAD
CLEANING
CASSETTE
press PLAY on the
ORREFER T OMANUAL
remote or VCR.
END:pLAy
KEY
• Use "dry" type head cleaning cassette only.
(Part No. NV-TCL30PT is recommended.)
• Follow cleaning tape instructions carefully.
Excessive use of tape can shorten head life.
• If head clog symptoms persist, contact your
nearest Factory Service Center or authorized
Service Center.
Power Source:
Power Consumption:
Video Signal:
VideoRecordingSystem:
Audio Track:
Tuner:
Broadcast Channels:
CABLE Channels:
120V AC, 60 Hz
Power On
Approx. 18 watts
P_wer Off
Approx. 3.3 watts
EIA Standard NTSC color
4 rotary heads helical
scanning system
1 track (Normal)
VHF 2-13, UHF 14-69
Midband A through I (14-22)
Superband J through W (23-36)
Hyperband AA-EEE (37-64)
Lowband A-5-A-1 (95-99)
Special CABLE channel 5A (01)
Ultraband 65-94, 100-125
Operating Tempersture:41°F-104°F (5°C-40°C)
Operating Humidity:
10%-75%
Weight:
7.7 Ibs. (3.5 kg)
Dimensions:
14-15/16" (W) x 3-2/3" (H) x
12-3/16" (D)
380 (W) x 93 (H) x 310 (D) mm
Note: Designs and specificationsare subjectto change
without notice.
A clean video head helps produce a clear picture.
So, we have equipped your VCR with a built-
in, non chemical head cleaning system that
helps prevent clogging of the video heads.
Cleaning is performed each time you load or
unload a video cassette.
• This feature is preventative only, If your video
heads are seriously dogged, consider the use of
a chemical nonabrasive head cleaning kit or take
your VCR to a Service Center.
Use a soft cloth or dusting
attachment
of
your vacuum
cleaner to dust your VCR.
Remove dust from the ventilation
holes on
the back sides and bottom of the cabinet.
Plastic surfaces
are easily scratched
and
can be marred by alcohol and various
solvents.
Avoid excessive
use of oil-based
furniture polishes since the materials
used
in the cabinet will accumulate
more dust.
We recommend
using a nonabrasive,
antistatic
cleaner and polisher.
Dioital Auto Picture
Automaticallycontrolsthe video output signal for
less noise depending on the tape condition.
DIoital Auto Trackina
Continuouslyanalyzes the signal and adjusts for
optimumpicture quality.
Manual Trackina Control tto reduce oicture noise)
Use during Playback and Slow Motion mode
to reduce picture noise. To return to Auto Tracking,
press POWER off, then on again.
V-Lock
Control
fto reduce
oicture
!itter)
In Still mode, CH (TRACKING)
_
operate as
a V-Lock control.
29
Advertisement
