One Touch Transfer; Transferring Using The Transferring List - Panasonic Diga DMR-EH50 Operating Instructions Manual

Hide thumbs Also See for Diga DMR-EH50:
Table of Contents

Advertisement

o
4_
DVD
buttons
ENTER
Titles and playlists recorded using a different encoding system (PAL
or NTSC) from the TV system currently selected on the unit cannot
be transferred (dubbed).
Preparation
olnsert a disc that you can use for recording (-_ 9).
oConfirm that there is enough remaining disc space.
With one touch transfer (dubbing), the title currently being played is
dubbed without any further setting.
o1_1 _
_
Select the audio type for recording bilingual
broadcast from "Bilingual Audio Selection" (-_ 56).
1
Play the title or playlist you want to
transfer
(dub).
2
Press
[DUBBING].
Selecting
the DVD drive speed _
1 Press [A] to select "DVD drive speed".
2 Press [<1, I_] to select "Maximum"
or "Normal (Silent)" and
press [T].
oSelecting "Normal (Silent)" means the noise generated by
this unit is less than "Maximum"; however, the time required
for transferring
(dubbing) will double (approximately).
"Only when transferring
(dubbing) to 5x high speed
recording compatible DVD-RAM, 8× high speed recording
compatible DVD-R or 8× high speed recording compatible
+R in High speed mode
3
Press [<,
I_] to select "Yes"
and
press [ENTER].
A transferring (dubbing) complete message appears on the
screen for a few seconds when transferring
(dubbing) is
completed.
oThe transfer (dubbing) speed and picture quality
are set as
follows.
The recording mode changes to FR mode if the remaining disc space
is exceeded using one of the recording modes indicated below.
m
_ rtf3_: High speed mode
High speed mode
Same recording mode used as when
recording the source title (XP-EP, FR).
oPlaylists
are transferred (dubbed) in FR
mode.
• To stop transferring
(dubbing)
=o45
• Recording and playing while transferring
(dubbing) = 45
You can order titles and playlists as desired for transfer (dubbing) to
disc.
oSelect the audio type for recording bilingual broadcast from
"Bilingual Audio Selection" (-_ 56) when:
-Transferring
(dubbing) to a DVD-R, DVD-RW (DVD-Video format)
and +R.
-When "Audio Mode for XP Recording"
is set to "LPCM" (_ 56)
and you are transferring
(dubbing) in XP mode.
While stopped
Press [FUNCTIONS].
2
Press [A,
T] to select
"DUBBING"
and press
[ENTER].
3
olf you are not going to change the registered list press [_']
several times (_ 45, step 6).
Set the transfer (dubbing)
direction.
olf you are not going to change the dubbing direction, press
[Y] (_ 45, step 4).
(1) Press [&, Y] to select "Dubbing
Direction" and press
[_].
(_2_ Press [&, V] to select "Source"
and press [ENTER].
(u_ Press [,k, V] to select the drive and press [ENTER].
(4_ Press [&, V] to select "Destination"
and press
[ENTER].
(5_Press [&,
Y] to select the drive and press [ENTER].
The same drive as the transfer (dubbing) source cannot be
selected.
@ Press [<1] to confirm.
RQT8027

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents