Download Print this page

Craftsman 358.794200 Operator's Manual page 4

20cc/1.2 cu.in. 2-cycle 150 mph/305 cfm gasoline blower

Advertisement

• Do not store the unit or fuel in a
closed area where fuel vapors can
reach sparks or an open flame from
hot water heaters, electric motors or
switches, furnaces,
etc.
• Store in a dry area out of reach of
children.
SPECIAL
NOTICE:
Exposure
to vibra-
tions through prolonged
use of gaso-
line powered hand tools could cause
blood vessel or nerve damage
in the
fingers, hands, and joints of people
prone to circulation
disorders or abnor-
mal swelling. Prolonged
use in cold
weather has been linked to blood ves-
sel damage
in otherwise
healthy
people. If symptoms
occur such as
numbness,
pain, loss of strength,
change in skin color or texture, or loss
of feeling in the fingers, hands, or
joints, discontinue
the use of this tool
and seek medical attention. An anti
vibration
system does not guarantee
the avoidance
of these problems.
Us-
ers who operate power tools on a con-
tinual and regular basis must monitor
closely their physical condition
and the
condition of this tool.
SPECIAL
NOTICE: This unit is
equipped with a temperature
limiting
muffler and spark arresting
screen
which meets the requirements
of Cali-
fornia Codes 4442 and 4443.
All U.S.
forest land and the states of California,
Idaho, Maine, Minnesota,
New Jersey,
Oregon, and Washington
require by
law that many internal combustion
en-
gines be equipped with a spark arrest-
ing screen.
If you operate in a locale
where such regulations
exist, you are
legally responsible
for maintaining
the
operating
condition of these parts.
Failure to do so is a violation of the
law. For normal homeowner
use, the
muffler and spark arresting
screen will
not require any service.
After 50 hours
of use, we recomend
that your muffler
be serviced
or replaced
by your Sears
Service Center.
CARTON
CONTENTS
Check carton contents
against the fol-
lowing list.
Model
358.794200
• Blower
• Blower tube
• Container
of oil
NOTE: It is normal for the fuel filter to
rattle in the empty fuel tank.
ASSEMBLY
_.WARNING:
If received as-
sembled,
repeat all steps to ensure
your unit is properly assembled
and all
fasteners
are secure.
Follow all safety
information
in the manuals
and on the
unit.
• No tools are required for assembly.
BLOWER
TUBE
Push the blower tube into the blow-
er outlet until it snaps into place.
Blower Outlet
Blower Tube
'_
-4-

Advertisement

loading