Advertisement
Available languages
Available languages
PROBLEM
Motor will not
run.
CAUSE
Fuse blown, circuit breaker
tripped.
Extension cord is wrong
CORRECTION
Check fuse box for blown
fuse and replace as
necessary. Reset circuit
breaker. Do not use a fuse or
circuit breaker with higher
rating than that specified for
your particular branch circuit.
Check for proper fuse. You
should use a time delay fuse.
Check for low voltage
)roblem.
Check the extension cord.
Disconnect
the other
electrical appliances
from
circuit or operate the
compressor on its own
branch circuit.
Check the extension cord.
length or gauge.
Loose electrical
connections.
Faulty motor.
Check wiring connection
inside terminal box.
Have checked by a Trained
Service Technician.
21_ ENG
D28900
Advertisement
