Table of Contents
Advertisement
Installation Instructions
Adjustable Kickplate
The adjustable kickplate can now be installed to
cover the front feet and the exposed area
beneath the dishwasher.
Remove the plastic filler panel as illustrated for
better access.
To lower the kickplate into position slide the
kickplate vertically via the mounting slots to cover
the dishwasher feet.
Replace the plastic filler panel.
Final Installation
Connect the power cord, water and drain lines as
previously described.
Open the water supply faucet to the full «On»
position.
Inspect all connections for any possible water
leaks.
Test dishwasher operation by selecting and
starting the Rinse & Hold Program. Pay close
attention to make sure the machine functions
properly and that all connections are secure.
IMPORTANT: If you encounter difficulty or a problem is noted with the dishwasher, please
contact the Equator Service Center immediately 1-800-776-3832 for reporting and possible
immediate resolution.
Profile of dishwasher with
plastic filer panel removed
22
Door (when closed)
Screw mounting locations
KICKPLATE
- Quick Links:
- Control Panels
Hide quick links:
Advertisement
Table of Contents
