Craftsman EZ3 917.377303 Owner's Manual page 4

These a ccessories were available when t his lawn m ower was produced. They a re also availabl
atmost Sears retail outlets and service centers. Most Sears stores can also order repair parts f
you, when y ou provide the model number ofyour lawn mower. Some o fthese a ccessories ma_
not a pply toyour l awn m ower.
LAWN MOWER P ERFORMANCE
CLIPPING DEFLECTOR
FOR REAR DISCHARGE LAWN MOWERS
GRASS CATCHERS
FOR
REAR DISCHARGE
LAWN MOWERS
MULCHER KITS
GRASS CATCHERS
FOR
SiDE DISCHARGE
LAWN MOWE RS
STABILIZER
GAS CANS
LAWN MOWER MAINTENANCE
BELTS
@
MUFFLERS
BLADES
AIR FILTERS
BLADE ADAPTERS WHEELS
SPARK PLUGS
ENGINE OIL
IMPORTANT: This cutting machine is capable
of amputating hands and feet and throwing
objects. Failure to observe the following safety
instructions could result in serious injury or
death.
Safety standards require operator presence
controls to minimize the risk of injury. Your unit
is equipped with such controls. Do not attempt
to defeat the function of the operator presence
controls under any circumstances.
Read these instructions and this manual' in its
entirety before you attempt to assemble or
operate your new lawn mower. Your new lawn
mower has been assembled at the factory
with the exception of those parts left
unassembled for shipping purposes. All parts
such as nuts, washers, bolts, etc., necessary
to complete the assembly have been placed in
the parts bag. To ensure safe and proper
operation of your lawn mower, all parts and
hardware you assemble must be tightened
securely. Use the correct tools as necessary to
ensure proper tightness_
TO REMOVE LAWN MOWER FROM
CARTON
• Remove loose parts included wi
mower.
• Cut down two end comers of cart_
and lay end panel down flat.
Remove a!l packing materials exc_
padding between upper and low
handle and padding holding operal
presence control bar to upper handl
• Roll lawn mower out of carton a_
check carton thoroughly for additior
loose parts.
HOW TO SET UP YOUR LAWN
MOWER
TO UNFOLD HANDLE
IMPORTANT: Unfold handles carefully so a_
not to pinch or damage control cables.
• Raise handles until lower handle section
locks into piece in mowing position.
4