Kicker Comp DC12 Owner's Manual page 4

Performance
Model:
Nominal Impedance [Zn], ohm
Resonance Frequency [fb or fo], Hz
Sensitivity [SPLo], dB @ 1W, 1m
Effective Excursion [EXmax
Power Handling Watts, Peak (RMS)
Enclosure Top Surface Depth, in (cm)
Enclosure Bottom Surface Depth, in (cm)
Enclosure Height, in (cm)
Enclosure Width, in (cm)
Figure A
Front mounting, speaker faces rear of vehicle
Front of
Vehicle
Rear mounting, speaker faces front of vehicle
Measurements are based on the 4 ohm enclosures. Note: The use of a subsonic filter will significantly increase the power handling.
The power handling specifications in this chart are calculated using a 25 Hz, 24 dB per octave subsonic filter.
4
[per enclosure]
™
], in (mm)
At least 4"
At least 4"
Comp Subwoofer Enclosures
DC10 DC12
2 or 4 2 or 4
40 38
98.4 99.9
.38 (9.76) .38 (9.76)
600 (300) 600 (300)
13 7/16 (34) 13 15/16 (35.3)
16 7/16 (41.7) 17 5/16 (43.9)
14 (35.5) 16 (40.6)
28 (71.1) 31 15/16 (81.0)
Figure B
Front of
DC
Vehicle
TC10
4
47
93.8
.38 (9.76)
300 (150)
5 (12.7)
8 5/8 (21.9)
15 (38.1)
21 1/2 (54.6)
DC
At least 4"